Group: Clemco
Catalog excerpts
Description Belt-mounted, adjustable valve — cools breathing air for use with Clemco respirator models Apollo 60 HP and Apollo 20 HP. Allows operator to adjust flow and temperature of incoming air. Cool Air Tube (CAT) Stock No. 04410 Note: For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment. Purpose The Clemco Cool Air Tube (CAT) allows the blast operator to control the temperature and volume of air to a Clemco high-pressure Type CE continuous flow supplied-air respirator within a preset range and to cool the air by as much as 50° F. Requirements for Operation 20 cfm at 90 to 100 psi of Grade D quality breathing air as defined by the Compressed Gas Association Commodity Specification: G-7.1 (www.cganet.com) Pressure requirements vary with hose length. 25 ft - 75 ft 90 psi 100 ft - 125 ft 95 psi 150 - 200 ft 100 psi NOTE: Do not exceed 200 ft of respirator hose with this device. The Cool Air Tube is placed between the respirator air supply line and the helmet breathing tube. A knurled knob on the valve lets the operator adjust the cooling rate of the air entering the respirator. • Increases productivity by keeping blast operator cool and comfortable in hot weather • Durable construction • Lightweight comfort system maintains NIOSH approval The Cool Air Tube is approved by NIOSH for use only with Clemco Apollo HP high-pressure Type CE supplied-air respirators (not for use with low-pressure respirators). The Cool Air Tube cannot be closed completely, so the operator always has at least the minimum required volume of air for breathing and to maintain positive pressure inside the helmet. The CAT comes with a belt that adjusts to fit up to a 54-inch waist. The durable buckle can be fastened and unfastened with gloved hands. A heat shield protects the operator from warm exhaust air (a byproduct of the production of cool air). The Cool Air Tube is one component of a NIOSH-approved system; use of counterfeit parts voids the NIOSH approval. To maintain NIOSH approval, use only genuine Clemco Apollo replacement parts.
Open the catalog to page 1Replacement Parts Item Related Clemco Literature Description Options and Accessories Description Packaging Ships in individual box Height: Width (dia.): Depth: Weight: Authorized Distributor: Blue body with black shield ISO 9001-2000 certified. Clemco is committed to continuous product improvement. Specifications are subject to change without notice. © 2004 Clemco Industries Corp. • One Cable Car Drive • Washington, MO 63090 • Phone (636) 239-4300 • Fax (636) 239-0788 www.clemcoindustries.com Stock No. 21965 Job No. 1195-1295 • Date of Issue: 06/98, Rev. B; 08/04
Open the catalog to page 2All CLEMCO INDUSTRIES catalogs and technical brochures
-
Apollo 600
4 Pages
-
Wetblast FLEX
2 Pages
-
Apollo 20 HP
2 Pages
-
CLASSIC SERIES
12 Pages
-
Tumble Cabinets
8 Pages
-
Automated Air Blast Systems
8 Pages
-
BNP A200 Series
4 Pages
-
Debris Screen Basket
1 Pages
-
Options Plus
4 Pages
-
Cabinet Dust Collectors
8 Pages
-
Climate Control Tube (CCT)
2 Pages
-
Apollo 60 and 600
4 Pages
-
ZERO Automation
8 Pages
-
Pulsar III, VI & VI-P
6 Pages
-
Pulsar VI-PE
2 Pages
-
Pulsar IX Pressure PS
2 Pages
-
Pulsar III-PE
2 Pages
-
Pulsar III-P
2 Pages
-
Operator Safety Equipment
8 Pages
-
Clemco Mule
1 Pages
-
COMFORT VEST
7 Pages
-
FLAT-TRAK ®
29 Pages
-
RPH
11 Pages
-
RPC-2
12 Pages
-
Blast Suit & Gloves (Rev. I)
2 Pages
-
Internal Pipe Tools (Rev. A)
8 Pages
-
Big Clem Bulk Blast Machines
2 Pages
-
CAP-4 Ambient Air Pump
2 Pages
-
Tumble Cabinets
2 Pages
-
BNP Suction Blast Guns
2 Pages
-
MB series
2 Pages
-
CDF Dust Collectors (Rev. C)
4 Pages
-
CALIPSO Ambient Air Pump
2 Pages
-
INEX Blast Cabinet (Rev. E)
2 Pages
-
2-Braid Blast Hose (Rev. G)
1 Pages
-
Clem-Cool Air Conditioner
1 Pages
-
Super Comet
4 Pages
-
Pre-assembled blast-room
4 Pages
-
Blast Suit & Gloves (Rev. E)
2 Pages
-
Bulk Abrasive Blast Machines
2 Pages
Archived catalogs
-
Automated Air Blast Systems
6 Pages