Catalogs >
CLEMCO INDUSTRIES >
6 Cuft Contractor Machine System with LP Respirator (Rev. D)

6 Cuft Contractor Machine System with LP Respirator (Rev. D)
2Pages

Catalog excerpts

6 Cuft Contractor Machine System with LP Respirator (Rev. D) - 1

Description TECHNICAL DATA SHEET Field portable, high-production, singlechamber blast machine system, rated at 150 psi, (for one operator). Holds 6 cubic feet of blast media. Equipped with Millennium pneumatic pressure-release remote controls. Components listed on next page. Contractor System 2006 AA with Apollo 600 LP Respirator Stock No. 21842 Note: For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment. Purpose High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 6 cubic feet of abrasive for up to 30 minutes of continuous blasting with standard No. 6 nozzle (3/8-inch orifice). Contractor System Accessories Requirements for Operation These items are required but not included with this equipment. • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. See Air Consumption Chart in Blast Off 2 booklet. • Maximum working pressure 150 psi • Minimum pressure 30 psi needed to operate OSHA-required remote control valves • Blast suit and work boots • Abrasive blast media - consult abrasive supplier for appropriate media for your application • Ambient air pump, capable of delivering 7 to 15 cfm of Grade D breathing air to the Apollo 600 LP. Consult Compressed Gas Association Commodity Specification: G-7.1 (www.cganet.com) Description of Operation The operator wears the Apollo 600 LP respirator, which is connected to an optional ambient air pump – such as Clemco’s CAP-1. The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting, releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Operator Safety Equipment 6 cu ft Contractor Blast Machine Advantages Approvals and Certifications • Rated for 150-psi maximum working pressure • 1-1/2-inch Millennium valve produces unrestricted air flow • Quantum metering valve maintains smooth, consistent flow; adjustment knob allows precise control of media flow • 1-1/4-inch piping allows up to 50 percent increase in air flow, when compared to standard 1-inch piping • 29-inch width fits through standard doorways with moisture separator removed • Four-wheel integral cart for ease of moving • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage • Central hookup point for blast hose and remote controls • High-efficiency moisture separator helps keep abrasive dry • Weather-resistant storage area holds manuals, paperwork and small parts • State-of-the-art NIOSH-approved respirator with DLX comfort-fit suspension. Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) code for 150-psi working pressure. Vessel is hydrostatically tested and National Board certified. Apollo 600 helmet is NIOSH-approved type-CE air fed respirator and is recognized by OSHA as having an assigned protection factor (APF) against lead dust of 1000 times the permissible exposure limit (PEL). Remote control system complies with OSHA regulation 1910.244 (b). NOTE: Prior to use, ensure that Apollo, type-CE, continuous-flow, supplied-air respirator is appropriate for your specific blasting conditions and requirements.

Open the catalog to page 1