6 Cuft Classic Blast Machines
2Pages

{{requestButtons}}

Catalog excerpts

6 Cuft Classic Blast Machines - 1

Yard-portable, heavy-duty, industrial, single-chamber blast machine rated at 150 psi working pressure. Model 2452 has 11/4 inch piping and holds 6 cubic feet of media (600 lbs expendable, mineral abrasive). This unit is equipped with FSV abrasive metering valve and remote controls. Complete system includes coupled hose, nozzle, supplied air respirator, and many accessories. 6 Cuft Classic Blast Machine Systems TECHNICAL DATA SHEET Note: For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment. Model 2452 with HP respirator and accessories High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. Model 2452 holds 6 cubic feet of abrasive providing 30 minutes of blasting at 100 psi with a No. 6 (3/8-inch) nozzle. These items are required but not included with this equipment: • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294). • Minimum of 50 psi is needed to close the pop-up valve and pressurize the blast machine. • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized. • NIOSH-approved, type CE, suppliedair respirator. • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com). • Abrasive blast media specifically manufactured for abrasive blasting and appropriate for your application. • Appropriate blast suit, work boots, hearing and eye protection. The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. • Yard portable, industrial-quality blast machines manufactured to ASME code. • 1-1/4-inch piping allows up to 50 percent more air flow when compared with 1-inch piping. • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system. • FSV abrasive metering valve maintains smooth, consistent, adjustable media flow. • State-of-the-art NIOSH-approved respirator with DLX comfort-fit suspension. Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 150-psi working pressure. Vessel is hydrostatically tested and National Board-certified. Remote control system complies with OSHA reg

Open the catalog to page 1
6 Cuft Classic Blast Machines - 2

Apollo Respirator Leather Gloves Nozzle Holder Respirator Air Flow Device Poly All-Weather Cover Inspection Door Assembly Twin Line Hose Outlet Valve Exhaust Muffler Inlet Valve Abrasive Trap Abrasive Metering Valve Model 2452: 6 cuft Blast Machine, Classic with 1-1/4" piping; 150 psi working pressure 50 Ft. Supa Blast Hose CALIPSO Ambient Air Pump (optional) or CPF Breathing Air Filter (included in CA system) Item Description Included with all 6 cuft Blast Machines 6 cuft Blast Machine Package with Remotes and LP model Respirator for use with Ambient Air or Optional HP model Respirator for...

Open the catalog to page 2

All CLEMCO INDUSTRIES catalogs and technical brochures

  1. Apollo 600

    4 Pages

  2. Apollo 20 HP

    2 Pages

  3. CLASSIC SERIES

    12 Pages

  4. Options Plus

    4 Pages

  5. Pulsar VI-PE

    2 Pages

  6. Pulsar III-P

    2 Pages

  7. Clemco Mule

    1 Pages

  8. COMFORT VEST

    7 Pages

  9. FLAT-TRAK ®

    29 Pages

  10. RPH

    11 Pages

  11. RPC-2

    12 Pages

  12. MB series

    2 Pages

  13. Super Comet

    4 Pages

Archived catalogs