4 Cuft Contractor Machine System with HP Respirator (Rev. D)
2Pages

{{requestButtons}}

Catalog excerpts

4 Cuft Contractor Machine System with HP Respirator (Rev. D) - 1

Description Field portable, high-production, singlechamber blast machine system, rated at 150 psi, (for one operator). Holds 4 cubic feet of blast media. Equipped with Millennium pneumatic remote controls. Components listed on next page. TECHNICAL DATA SHEET Contractor System 2004 CA with Apollo 600 HP Respirator Stock No. 21548 Note: For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment. Purpose High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Machine holds 4 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 5 nozzle (5/16-inch orifice). Contractor System Accessories Requirements for Operation These items are required but not included with this equipment. • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. See Air Consumption Chart in Blast Off 2 booklet. • Minimum 30 psi needed to operate OSHA-required remote control valves • Blast suit and work boots • Abrasive blast media - consult abrasive supplier for appropriate media for your application • Compressed air source capable of delivering 20 cfm (at 90 to 100 psi) of Grade D breathing-air as defined by the Compressed Gas Association Commodity Specification: G-7.1 (www.cganet.com) Description of Operation The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting, releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Operator Safety Equipment 4 cu ft Contractor Blast Machine with CPF-20 Air Filter Installed Advantages Approvals and Certifications • Rated for 150-psi maximum working pressure • 1-1/2-inch Millennium valve provides unrestricted air flow • Quantum metering valve maintains smooth, consistent flow; adjustment knob allows precise control of media flow • 1-1/4-inch piping allows up to 50 percent increase in air flow, when compared to 1-inch piping • 29-inch width fits through standard doorways with moisture separator removed • CPF-20 breathing air filter, installed • Four-wheel integral cart for ease of moving • Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage • Central hookup point for blast hose and remote controls • High-efficiency moisture separator helps keep abrasive dry • Weather-resistant storage area holds manuals, paperwork and small parts • State-of-the-art NIOSH-approved respirator with DLX comfort-fit suspension. Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) code for 150-psi working pressure. Vessel is hydrostatically tested and National Board certified. Apollo 600 helmet is NIOSH-approved type-CE air fed respirator and is recognized by OSHA as having an assigned protection factor (APF) against lead dust of 1000 times the permissible exposure limit (PEL). Remote control system complies with OSHA regulation 1910.244 (b). NOTE: Prior to use, ensure that Apollo, type-CE, continuous-flow, supplied-air respirator is appropriate for your specific blasting conditions and requirements.

Open the catalog to page 1

All CLEMCO INDUSTRIES catalogs and technical brochures

  1. Apollo 600

    4 Pages

  2. Apollo 20 HP

    2 Pages

  3. CLASSIC SERIES

    12 Pages

  4. Options Plus

    4 Pages

  5. Pulsar VI-PE

    2 Pages

  6. Pulsar III-P

    2 Pages

  7. Clemco Mule

    1 Pages

  8. COMFORT VEST

    7 Pages

  9. FLAT-TRAK ®

    29 Pages

  10. RPH

    11 Pages

  11. RPC-2

    12 Pages

  12. MB series

    2 Pages

  13. Super Comet

    4 Pages

Archived catalogs