Group: Clemco
Catalog excerpts
TECHNICAL DATA SHEET Field-portable, light-duty, industrial, single-chamber blast machines rated at 125 psi working pressure. Model 1028, holds 1/2 cubic foot of media (50 lbs expendable, mineral abrasive). This unit is equipped with MSV abrasive metering valve. Note: For safe, efficient blasting, read and follow the owner's manual and seek training for everyone who will use this equipment. 0.5 Cuft Classic Blast Machine System with 1/2" piping Model 1028 with HP respirator and accessories High-performance, versatile blast cleaning system removes contamination, corrosion, mill scale, and coatings from most surfaces. Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings. See related literature for additional applications. Model 1028 holds 1/2 cubic foot of abrasive providing 15 minutes of blasting at 80 psi with a No. 3 (3/16-inch) nozzle. This unit can operate with as little as 12 cfm of air volume. Requirements for Operation These items are required but not included with this equipment: • Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294). • Minimum 12 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine. • OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized. • NIOSH-approved, type CE, suppliedair respirator. • Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com). • Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application. • Appropriate blast suit, work boots, hearing and eye protection. The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream. Approvals and Certifications Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure. Vessel is hydrostatically tested and National Board-certified. Remote control system complies with OSHA regulation 1910.244 (b). • One-man portable industrial-quality blast machines manufactured to ASME code. • Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system. • MSV abrasive metering valve maintains smooth, consistent, adjustable media flow. • State-of-the-art NIOSH-approved respirator with DLX comf
Open the catalog to page 1Apollo Respirator Leather Gloves Respirator Hose Nozzle Holder Respirator Air Flow Device 25 ft. 1/2" Blast Hose Coupled Outlet Valve Inlet Valve Inspection Door Assembly Flexible Pusher Line Blast Hose Safety Cable Twin Line Hose Model 1028: 0.5 cuft Blast Machine, Classic with 1/2" piping, 125 psi working pressure Stock No. Includes MSV 1/2" abrasive metering valve Includes: Blast machine 21051, Apollo 20 LP DLX (for use with ambient air) respirator with Constant Flow Connector, 50 ft. respirator hose, and Accessory Package Includes: Blast machine 21051, Apollo 20 HP DLX (for use with...
Open the catalog to page 2All CLEMCO INDUSTRIES catalogs and technical brochures
-
Apollo 600
4 Pages
-
Wetblast FLEX
2 Pages
-
Apollo 20 HP
2 Pages
-
CLASSIC SERIES
12 Pages
-
Tumble Cabinets
8 Pages
-
Automated Air Blast Systems
8 Pages
-
BNP A200 Series
4 Pages
-
Debris Screen Basket
1 Pages
-
Options Plus
4 Pages
-
Cabinet Dust Collectors
8 Pages
-
Climate Control Tube (CCT)
2 Pages
-
Apollo 60 and 600
4 Pages
-
ZERO Automation
8 Pages
-
Pulsar III, VI & VI-P
6 Pages
-
Pulsar VI-PE
2 Pages
-
Pulsar IX Pressure PS
2 Pages
-
Pulsar III-PE
2 Pages
-
Pulsar III-P
2 Pages
-
Operator Safety Equipment
8 Pages
-
Clemco Mule
1 Pages
-
COMFORT VEST
7 Pages
-
FLAT-TRAK ®
29 Pages
-
RPH
11 Pages
-
RPC-2
12 Pages
-
Blast Suit & Gloves (Rev. I)
2 Pages
-
Internal Pipe Tools (Rev. A)
8 Pages
-
Big Clem Bulk Blast Machines
2 Pages
-
CAP-4 Ambient Air Pump
2 Pages
-
Tumble Cabinets
2 Pages
-
BNP Suction Blast Guns
2 Pages
-
MB series
2 Pages
-
CDF Dust Collectors (Rev. C)
4 Pages
-
CALIPSO Ambient Air Pump
2 Pages
-
Cool Air Tube (Rev. B)
2 Pages
-
INEX Blast Cabinet (Rev. E)
2 Pages
-
2-Braid Blast Hose (Rev. G)
1 Pages
-
Clem-Cool Air Conditioner
1 Pages
-
Super Comet
4 Pages
-
Pre-assembled blast-room
4 Pages
-
Blast Suit & Gloves (Rev. E)
2 Pages
-
Bulk Abrasive Blast Machines
2 Pages
Archived catalogs
-
Automated Air Blast Systems
6 Pages