Catalogs >
Cleaver-Brooks >
ProFire-XL Series

ProFire-XL Series
6Pages

Add to favorites

Catalog excerpts

PROFIRE xl Series burners ® High turndown burner for large firetube and watertube applications.

Open the catalog to page 1

The ProFire XL series, suitable for large firetube and watertube applications, is offered in two standard configurations; vertical and horizontal. It’s unique and precise air metering system permits accurate air-to-fuel ratios for maximum combustion efficiency. Through the use of innovative technology, the XL series offers high turndown on natural gas and light oil. Precise Oil Metering A unique design feature on ProFire XL series air atomizing oil burners, a V-port oil flow control valve is used for maximum capacity and precise oil control. Air & Steam Atomization A remote air compressor...

Open the catalog to page 2

Low-NOx Configurations The ProFire XL series is offered in two standard configurations; vertical and horizontal. Vertical configurations support capacities ranging from 37.8 to 63.0 MMBTU, and horizontal configurations support capacities from 67.2 to 92.4 MMBTU. The standard and low-NOx vertical and horizontal configurations are capable of bum]™ g natural gas, propane gas, air atomized No. 2 oil, as well as combination gas/No. 2 oil. Full modulation operation is standard and a parallel positioning system is required for burner management and combustion control. Available to <30 PPM NOx...

Open the catalog to page 3

Input is based on fuel Btu content and altitude of 2,000 feet or less. If altitude > 2,000 feet and < 8,000 feet, derate capacity 4% per 1,000 feet over 2,000. Consult factory for higher altitudes. Gas input is based on natural gas with 1,000 Btu/cu.ft., 0.60 gravity, 0“ w.c. furnace pressure and the aforementioned conditions. Oil input based on 140,000 Btu/gal and the aforementioned conditions. Consult factory for 50Hz. applications. Contact the factory for shipping weight estimation.

Open the catalog to page 4

Ultra-Low-NOx Configuration The ProFire NTXL was designed and developed with a Flue Gas Recirculation system which has been proven to be the benchmark in the industry. Emissions reduction, fuel savings, performance, and reliability make the ProFire NTXL an excellent choice. The Cleaver-Brooks ProFire NTXL series burner offers natural gas, proBS|b air mix, air atomized #2 oil, and combination gas and oil fuel options from 37.8 to 92.4 MMBTU per hour, with full modulation operation and parallel positioning for greater efficiency and cost savings. The ProFire NTXL is an ultra-low-NOx burner...

Open the catalog to page 5

Uncontrolled Emissions Configuration (XLL, XLG, XLLG) Input is based on fuel Btu content and altitude of 2,000 feet or less. If altitude > 2,000 feet and < 8,000 feet, derate capacity 4% per 1,000 feet over 2,000. Consult factory for higher altitudes. Gas input is based on natural gas with 1,000 Btu/cu.ft., 0.60 gravity, 0“ w.c. furnace pressure and the aforementioned conditions. Oil input based on 140,000 Btu/gal and the aforementioned conditions. Consult factory for 50Hz. applications. Contact the factory for shipping weight estimation. Packaged Burner Systems 351 21st Street, Monroe, WI...

Open the catalog to page 6

ProFire-XL Series 6Pages

Catalog excerpts

All Cleaver-Brooks catalogs and technical brochures

ProFire-XL Series
6Pages