Catalogs >
CLARK Material Handling >
Specification sheet CLARK CQ20/25/30

Specification sheet CLARK CQ20/25/30
6Pages

Add to favorites

Catalog excerpts

Specification sheet CLARK CQ20/25/30 - 1

CQ20/25/30 Diesel or LPG engine Pneumatic or Superelastic Tires 2000 kg 2500 kg 3000 kg

Open the catalog to page 1

Specification sheet CLARK CQ20/25/30 - 2

Ast = Wa + x + l6 + a b12 – applies only if – < b13 2 b12 – ( l6 + x)2 + – – b13 2 b12 – > applies only if – – b13 2 a = 200 Ast = Wa + For corresponding data see Specification Chart.

Open the catalog to page 2

Specification sheet CLARK CQ20/25/30 - 3

GENERAL DATA Note: The listed capacities are valid only for the standard upright in vertical position with standard fork carriage and standard forks, up to max. lifting height of 3300 mm. The centre of gravity of the load may be displaced by max. 100 mm against the longitudinal centre plane of the truck. Load centre is determined from top and front face of the forks. The values are based on a 1000 mm cube load configuration with the centre of gravity at the true centre of the cube. With upright tilted forward lower capacity values are valid. Attachments, longer forks, exceptional load...

Open the catalog to page 3

Specification sheet CLARK CQ20/25/30 - 4

1| Optional with super-elastic tyres *2Futher lift heights see upright table *3 with 1.6 km/h Without load at friction coefficient (x=0.8 *4 Diesel = Tier3 / LPG = Tier "5 Equivalent permanent sound-pressure level L pAeq, T in accordance with DIN EN 12053 (previosly DIN 45635-361 All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary +5% and -10% due the motor and system tolerances and represent nominal values obtained under typical operating conditions. Specifications for Non-emission limited...

Open the catalog to page 4

Specification sheet CLARK CQ20/25/30 - 5

1| Optional with super-elastic tyres *2Futher lift heights see upright table "3 with 1.6 km/h Without load at friction coefficient ^=0.8 *4 Diesel = Tier3 / LPG = Tier *5 Equivalent permanent sound-pressure level L pAeq, T in accordance with DIN EN 12053 (previosly DIN 45635-361 All values shown are for standard lift truck with standard equipment. If the truck is supplied with options, values may change. All values given may vary +5% and -10% due the motor and system tolerances and represent nominal values obtained under typical operating conditions. Specifications for Non-emission limited...

Open the catalog to page 5

Specification sheet CLARK CQ20/25/30 - 6

PRODUCT DESCRIPTION The CQ20-30 series from CLARK has been developed with the aim of offering you reliable trucks with simple yet durable components. This means low operating and maintenance costs combined with an extremely good price-performance ratio. The sturdy “built to last” upright, as used in the premium models of Clark’s GEN2 series, as well as the robust design typical of CLARK, make these forklifts an ideal solution for diverse applications. Driver’s cab A handle on the front column of the entry side makes it easier to climb up and down. The rubber floor covering in the footwell...

Open the catalog to page 6