Catalogs >
CLARK Material Handling >
C 15C/18C/20Cs GEN2 Series

C 15C/18C/20Cs GEN2 Series
8Pages

Catalog excerpts

• The operator compartment is supported on specially engineered isolating mounts, reducing the amount of engine noise and vibration transmitted to the operator ensuring a more comfortable ride. Highly Maneuverable, Easily Serviceable, Broadly Flexible, Extremely Dependable The GEN2 C15-20s and C15C-20sC Series proudly adds to CLARK’s unique history of building the best forklifts with evolutionary steps in ergonomics, power, safety, durability and performance. These narrow-width models, designed for distribution, manufacturing and warehousing of all types, are suited for the toughest...

Open the catalog to page 2

98 % The two-stage engine air filter removes Ninety-Eight Percent of incoming dust before it enters the filter system. • Nested upright rails provide positive rail interlock and a narrow “profile” to maximize the vision window. The overhead guard safety bars run parallel to the operator’s line of sight resulting in a clear, unobstructed view. Maximum Visibility + Minimum Fatigue = Ultimate Safety & Maximum productivity

Open the catalog to page 3

• With four turns lock-to-lock the hydrostatic power steering provides the operator with excellent maneuverability and ease of control. • Low, open foot steps with traction plates make entry/ exit quick, easy, and safe. Rugged Durability, High Performance, Extreme Environments, Demanding Applications The GEN2 series is designed to tackle any task placed in its path. The open-core, plate-fin radiator provides maximum cooling of the engine, transmission and axle in the harshest environments and the most demanding applications.

Open the catalog to page 4

Safety All CLARK forklifts, associated devices and tools are in conformance to CE, ANSIASME, OSHA and UL regulations. • Start in neutral: If the Gear lever is not positioned in neutral, the engine will not start. • Tilt Lock Valve: Prevents the accidental forward tilting of the mast while engine is switched off. • Gas Cylinder with Automatic Lock: Prevents accidental closure of hood. • Safety valve: Prevents accidental uncontrolled lowering in the event of oil pressure hose damage. • Forward and reverse travel is not possible whilst the parking brake is in the on position. Smooth C o n t r...

Open the catalog to page 5

C15-20s / C15C-C20sC STANDARD FEATURES & BENEFITS HYDRAULIC SYSTEM ● ● PARKING BRAKE ● ● Simple & Error Proof • Foot-applied brake can be released by hand or foot. • Transmission disengages when parking brake is set preventing driving against brakes. • Horn will sound if brake is not set after 3 seconds from when the engine is shut off. ● Maximum Horsepower • Uses a load-sensing ow control valve for steering to reduce horsepower loss and heat buildup. Optimum Performance Of Attachments • The main hydraulic valve incorporates adjustable ow controls for tilt and auxiliary functions. Sectional...

Open the catalog to page 6

STEERING AXLE (pneumatic shown) ● ● Rugged Design • Linkage pivot pins have a “double shear” design to withstand impact without loosening or breaking. Simple Axle Design • Double-acting cylinder provides steering force. DASH DISPLAY ● ● ● RUGGED UPRIGHT AND CARRIAGE ● ● I-Beam style upright • Maximizes visibility and strength, allows for internal hosing and cable. • Six carriage rollers and two side-thrust rollers minimize de ection and sideplay, reduce roller contact stress and extend component life. • Hydraulic cushioning valves provide silent staging of the rails to reduce shock during...

Open the catalog to page 7

® C15/18/20sC & C15/18/20s Dealer: CLARK EUROPE GmbH Neckarstraße 37 · D-45478 Mülheim an der Ruhr Tel: +49 (0)208-37 73 36-0 · Fax: +49 (0)208-37 73 36-36 Info-europe@clarkmheu.com · www.clarkmheu.com V1_02_2011 Printed in Germany B0510E CR061010M © 2010 CLARK Material Handling Company

Open the catalog to page 8