Catalogs >
Cirrus Research >
CR:201 Sond Sign Noise Activated Warning Sign

CR:201 Sond Sign Noise Activated Warning Sign
4Pages

Catalog excerpts

CR:201 Sond Sign Noise Activated Warning Sign - 1

dedicated to noise measurement SoundSign™ for Hospitals & Healthcare SoundSign™ for Schools & Colleges SoundSign™ for Music & Entertainment SoundSign™ Noise Warning Sign

Open the catalog to page 1

CR:201 Sond Sign Noise Activated Warning Sign - 2

What is the SoundSign? SoundSign™ is a highly visible noise activated warning sign that has been designed for use in environments where there is a need to clearly warn or indicate when a preset noise level is reached. Benefits at a glance > Lights up when a preset noise level is exceeded > Quick & simple to install > Trigger level from 40dB(A) to 114dB(A) for use in any environment > High intensity white LED technology for high visual impact and a long operating life > Use text and graphics to communicate specific noise level warnings > 4 standard designs to cover all applications In...

Open the catalog to page 2

CR:201 Sond Sign Noise Activated Warning Sign - 3

Installation & Use Installation of a Sound Sign is very simple. Select the required trigger level and connect the 12v power supply to the unit. When the noise level measured by the microphone reaches this level, the sign will illuminate and show the warning. The unit can also be set to keep the warning illuminated for up to 30 seconds after the level has fallen back below the trigger level. This removes the sudden on-off indication that traditional noise warning signs often produce and which can cause confusion as to when hearing protection should be worn. The SoundSign avoids these...

Open the catalog to page 3

CR:201 Sond Sign Noise Activated Warning Sign - 4

Ordering Information Noise activated warning sign Trigger Level Frequency Weighting ‘ Time Weighting Visual Indication High intensity white LED with four standard designs User selectable brightness levels Display delay time External Power 2.1mm Power Jack, 12v DC via CU:200 Mains Power Supply Output Connector Control for Remote Display Units via standard 2.1mm Power The CR:201 Master Unit and CR:202 Remote Unit are available with a selection of standard designs which are listed below. Custom design options are available. Please contact Cirrus Research for details of these custom design...

Open the catalog to page 4