You may also be interested in
Digital controller, Hygrometer, Hand-held data-logger, Thermocouple type K, Probe
Text version of the page
PALM-SIZED TEMPERATURE/HUMIDITY METERPortable temperature/humidity meter: HN-CH - 14570 HN-CH SERIESThe HN-CH series is accurate palm-sized temperature/humidity meter with the measuring range of 0 to 100%RH by using a high performance and reliable humidity sensor. Three types of sensors, sensor built-in type, probe type and separated type can be selected to meet various applications requirement. It also has the data logging function capable to store up to 8000 readings each of temperature and humidity into memory, and communications function (RS232C or RS485) for various use such as mobile measurement, desk-to p and wall-mount. FEATURESMeasurement of relative humidity 0 to 100%RH by polymer capacitance type humidity sensor High accurate measurement in low humidity range less than 20%RHSeparated typeImproved repeatability and reliability by a new developed humidity sensor Design fitted into mobile measurement, desk-top and wall-mount Logging function of up to 8000 readings each of temperature and humidityProbe typeEasy maintenance with complete interchangeable sensors Three types of sensors, sensor built-in type, probe type and separaed type meet various applications requirementMODELSDISPLAY/SETTING CONTENTSHN-CHCurrent data: Month, day, hour, minute Temperature reading (ēC or ēF) Relative humidity or dew-point temperature reading (ēC or ēF)Type of sensor N: Sensor built-in type P: Probe type (with 1.5m cable) T: Separated type (with 1.5m cable)Replaying data: Programmed parameters Logged data at each year, month, day, hour or minute Maximum temperature/humidity, minimum temperature/humidity, average temperature/humidity, totalizing temperatureCommunications interface R: RS232C S: RS485Setting items: Clock --- Year, month, day, hour, minute Temperature --- ēC, ēF display setting Relative humidity, dew-point temperature (ēC or ēF) display setting Logging type --- Manual or interval Logging start time --- Year, month, day, hour, minute or key operation Logging end time --- Year, month, day, hour, minute or key operation Logging repetition --- No repetition, every day, every week Measuring interval --- Continuous, 1 to 60 minutes High alarm, low alarm, reference temperature for totalizing, totalizing direction, auto power-off, key lockGENERAL SPECIFICATIONSSensor: Humidity --- High-polymer capacitance type humidity sensor Temperature --- Semiconductor temperature sensor Measuring range: Humidity --- 0 to 100%RH (No dew condensation) Temperature --- -10 to 50ēC (Built-in type) -40 to 80ēC (Probe type, Separated type) Accuracy rating: Humidity --- 2%RH (0 to 90%RH at 25ēC) 3%RH (90 to 95%RH at 25ēC) Temperature --- 0.5ēC (0 to 50ēC) 1ēC (except other than the above shown) Temperature coefficient: Display contents: Clock constantly, measured value by key-touch at OFF Communications function: RS232C or RS485 Power supply: 2 AA batteries or 100-240V AC (with AC adapter ; sold separately) External dimensions: W64 X H113 X D32mm (For built-in type) Weight: Approximately 150g (including batteries) 0.1%RH/ēC (5 to 80ēC) (Humidity sensor) Response time: Within 15 seconds (Humidity sensor) (90% response, 25ēC constant, under 0.1m/s ventilation) Working temperature: Main unit: -10 to 50ēC Sensor: Same as measuring range Sensor interchangeability: Interchangeable by plug-in (For probe type and separated type, interchangeable including cable) Number of logging data: Temperature/humidity; Up to 8000 data each (EEPROM) Display: Reflecting type LCD display Battery life: Approximately a half year (when using AA batteries in constant temperature and humidity, and using data logging as data logger while auto power-off function is on.)CE markingConformity directive (89/336/EEC, 92/31/EEC amendment, 93/68/EEC amendment) Conformity standards IEC61326+A1: Emission class B, immunity Table1 (Minimum requirement) Conformity condition HN-CHNS: Connection cable must be within 30m indoors HN-CHTS, HN-CHPS: Connection cable must be within 3m Stability under EMC test environment HN-CHNR, HN-CHTR, HN-CHPR: Temperature 0.5ēC, relative humidity 2%RH HN-CHNS, HN-CHTS, HN-CHPS: Temperature 0.5ēC, relative humidity 3%RH1PSE-418B |
|