Catalogs >
CHINO CORPORATION >
Thyristor Regulators Three-Phase

Thyristor Regulators Three-Phase
6Pages

Catalog excerpts

Phase-angle firing. voltage feedback/ Zero-cross firing > Phase-angle firing. current feedback/ Zero-cross firing > Phase-angle firing. power feedback/ Zero-cross firing > Phase-angle firing. no feedback/ Zero-cross firing > Provided (Installed to unit) > Provided (Panel installation) > Provided (Installed to unit including communication) > Provided (Panel installation including communication) > 0: Mounted externally( or none) 1: Built-in > 3: 3 arms 6: 6 arms > *1 In case the rated current with rapid fuse is 010 or 020, ғA cannot be chosen *2 For setting communication unit of panel installation, exclusive cable ԓSH-JUK3 of 3m or ԓSH-JUK5 of 5m are necessary. *3 In case current rate with CT function is more than 100A ԓ1 cannot be chosen. When installing CT externally please select 0.

Open the catalog to page 1

it depends on the following deratingperformance. > Phase: Three-phases Rated voltage: 200V AC(200V/ 220V/ 240V selectable by switch) 400V AC(380V/ 400V/ 440V selectable by switch) to be specified ( main circuit power supply and control circuit power supply are common) * The models which have a different main circuit power supply and a control circuit power supply are manufactureable. Rated current: 10A, 20A, 30A, 50A, 75A, 100A, 150A, 200A, 250A, 300A, 400A, 500A, 750A, 1000A to be specified Rated frequencies: 50/60 Hz (automatic change) Allowable voltage fluctuation: 10% of rated voltage...

Open the catalog to page 2

Bit No. Terminal function 1 Remote setting input common (Al com) 2 Remote setting input ref. voltage(Al V-ref) 3 Remote setting input1 (Al1) 4 Remote setting input1 (Al2) 5 Remote setting input1 (Al3) 6 Remote contact input common (DI com) > 7 Remote contact input1 (DI1) Trimmer No. Setting function 8 Remote contact input2 (DI2) SET1 Ramp (0 to 100%) 9 Remote contact input3 (DI3) SET2 Elevation (0 to 100%) 10 N, C (unused) SET3 Soft start (Approx 1 to 20 sec.) 11 N, C (unused) SET4 Current limit (0 to 100%) 12 N, C (unused) SET5 Ratio of heater disconnection(0 to 100%) SET6 Imbalance...

Open the catalog to page 3

Control input signal only Current signal (4 to 20mA DC) Manual setting unit and with auto/man switching Current signal (4 to 20mA DC) With ramp setting unit (Ramp using control input signal) Current signal(4 to 20mA DC) Voltage signal (1 to 5V DC) With ramp setting unit (Ramp using remote setting input) Current signal (4 to 20mA DC) Manual setting unit only With elevation setting unit Current signal (4 to 20mA DC) Manual setting unit, ramp setting unit with auto/man switcing Current signal (4 to 20mA DC) Setting unit with output indicator (*Cannot be used in zero-cross control) Current...

Open the catalog to page 4

Model Specifications Rated current 200V system 400V system Models VL-JAL Simple function type for ramp setting Variable resistance value: 10k 30A 250GH-50S 660GH-50S 50A 250GH-75S 660GH-80S VL-JAM N2: Voltage indicator (0 to 250V) 4: Voltage indicator (0 to 500V) All-in-one function combined with indicator, ramp setting, manual setting and selector switch Variable resistance value: 10k 75A 250GH-100S 660GH-100S 100A 250GH-160S 660GH-160S 150A 250GH-200S 660GH-200S (Ramp setting) 2k (Manual setting) 200A 250GH-315S 660GH-315S 250A 250GH-350S 660GH-350S 300A 250GH-450S 660GH-450S 400A...

Open the catalog to page 6