HYBRID MEMORY RECORDER
8Pages

{{requestButtons}}

Catalog excerpts

HYBRID MEMORY RECORDER - 1

AH4000 SERIES 180mm chart PEN TYPE HYBRID MEMORY RECORDER AH4000 series is a hybrid recorder which employs bright and clear, easy to view LCD display. Measuring value display is prepared as 1 point display, multi-points simultaneous display and digital display + bar graph display. Various measuring and recording settings can be easily done by front key switch and confirmed by LCD digital display. ■ FEATURES •Corresponds to SD card Equipped with SD card (sold separately) and it can record data, read and write setting value. •Full multi range Equipped with DC voltage 10 kinds, T/C 36 kinds, RTD 12 kinds, in total 58 kinds. Easily set the range per channels. •Easy data management by communication interface Provided with USB port and connect with PC directly. RS232C, RS422A, RS485 and Ethernet communication interface is optionally prepared. When Ethernet is selected, settings from the web and E-mail alarm notification are added. •Package Software attached By Data acquisition software, the use of application expands from recording/management to information processing. *Optional communication interface required. Data analysis software can replay display, wave form process, editing and trend display. Parameter setting software can manage the setting information on PC. •Standard alarm display/ Printing function Set 4 types of alarm per each input points. When alarm occurs, status display “ALM” flashes and measuring value flashes at LCD operation screen. •Chart end detection function available Can set the alarm operation when chart end is detected. •Various programming function Process the measured data by programming setting and displayed/recorded data of each channels are shown as programmed result data. ■ MODELS AH47□ P-□□□ - □ NN Input point 1 : 1 pen 2 : 2 pen 3 : 3 pen 4 : 4 pen Communication interface (option) N : None E : Ethernet R : RS232C A : RS422A/RS485 Q : RS232C+RS485 C : RS422A/RS485+RS485 G : Ethernet + RS422A/RS485 +RS485 ---Alarm output / remote contacts (option) 0 : None 2 : Mechanical relay 2 points ('a' contact) 4 : Mechanical relay 4 points ('c' contact) + remote contact 5 points A : Mechanical relay 6 points ('a' contact) + remote contact 5 points 8 : Mechanical relay 8 points ('c' contact) + remote contact 10 points Power supply A : 100-240V AC — Carrying handle and feet (option) N : None T : With carrying handle and feet

Open the catalog to page 1
HYBRID MEMORY RECORDER - 2

4 Engineering port (USB communication connector) 1. Graphic LCD display Display measured data by digital display and analog indication by bar graph display. ● 1 point enlarged digital display ● 1 point enlarged digital display + bar graph display ● 4 points digital display ● 4 points pointer display 2. Front key switch Setting contents can be easily registered by front key switch. Press Menu key and menu screen (list of setting items) will be displayed on graphic LCD. 4. Engineering port at the front Save measured data to SD card by designated interval (Fastest 0.1sec). Also, register...

Open the catalog to page 2
HYBRID MEMORY RECORDER - 3

■RECORDING EXAMPLE ●Periodic data printing Record the data with time, channel no., data, unit over trace printing by arbitrary interval. Trace printing Digital recording ●List printing Print setting data such as range, scale etc. for each channel. Chart speed Scale/Tag, Burnout ●Data print When the latest data is required, trace printing will stop and recorded. Digital recording Trace printing ●Alarm activation and reset printing Level Alarm reset channel number When alarm activates/reset, prints time, channel no., alarm type and alarm no. Alarm reset time Level Alarm activation Alarm type...

Open the catalog to page 3
HYBRID MEMORY RECORDER - 4

Analog display: Digital display: Display item: Status display: Alarm display: Alarm types: Alarm settings: Alarm output: ■INPUT SPECIFICATIONS Measuring points: 1 to 4 points Input types: DC voltage — ±13.8mV, ±27.6mV, ±69.0mV, ±200mV, ±500mV, ±1V ±5V, ±10V, ±20V, ±50V DC current — Max 50mA by external shunt resistor (100Q, 250Q) (sold separately) Thermocouple — K, E, J, T, R, S, B, N, U, L, W-WRe26, WRe5-WRe26, PtRh40-PtRh20, NiMo-Ni, CR-AuFe, Platinel II, Au/Pt Resistance thermometer — Pt100, old Pt100, JPt100, Pt50, Pt-Co Accuracy ratings: Refer to the table of...

Open the catalog to page 4
HYBRID MEMORY RECORDER - 5

PERFORMANCE SPECIFICATION Alarm printing: Alarm activated — Time, channel no., alarm type and level Alarm reset — Time, channel no., alarm level Memory capacity — Max. 48 data List printing: When required, interrupt trace printing and print date, chart speed and setting information of each channel. Message printing: Print when required Up to 15 characters/message, register up to 20 types. ON/OFF of display and recording: Select ON / OFF of display trace recording to chart, digital recording to chart, recording to SD card per each channel. Subtract printing: Record difference between...

Open the catalog to page 5
HYBRID MEMORY RECORDER - 6

Remote contact: By external relay contact signal (digital contact: short or open), you can select chart speed or data printing Input points: 5 points, 10 points Input signal: Digital contact signal or open collector signal Contact capacity: 5V DC/2mA Function: 1. Record start/stop 2. Chart speed 3-speed switch 6. Operation record (Record ON/OFF condition to the designate location by bar line) 7. Integration/F value reset 8. Memory card (record start/stop) 9. Alarm output rest 10.Time correction Alarm output: Mechanical relay ('a' contact) 2 points, 6 points 12 points Max. load 100 to...

Open the catalog to page 6
HYBRID MEMORY RECORDER - 7

■ Exceptions for accuracy ratings Input type Exceptional range ■TERMINAL ARRANGEMENT ●Alarm relay output (12 points ‘a’ contact) + remote contacts (10 points) and communication interface Communication terminal 1 2 3 4 5 6 7 8 SG SD RD RS-232C RS-422A SG SDA SDB RDA RDB RS-485 SA SB SG Power/protective conductive terminals 100-240V AC Remote contact terminals (option) Alarm output terminals (option) N.O terminal COM terminal Measurement input terminals TC.mV(+), RTD(A) terminals TC.mV(-), RTD(B) terminalsminals RTD(B) terminals Ethernet connector ●Alarm relay output (8 points ‘c’ contact) +...

Open the catalog to page 7

All CHINO CORPORATION catalogs and technical brochures

  1. LH100

    4 Pages

  2. IR-FA SERIES

    6 Pages

  3. IR-TA SERIES

    2 Pages

  4. MODEL IR-TE

    2 Pages

  5. TRAMS III

    4 Pages

  6. IR-CZQH

    2 Pages

  7. On-line model

    12 Pages

  8. C800

    4 Pages

  9. IR-R0A

    2 Pages

  10. R000

    4 Pages

  11. HN-EK

    2 Pages

  12. HN-EH

    2 Pages

  13. IR-HA

    2 Pages

  14. IR-TE

    2 Pages

  15. DP2000G

    4 Pages

  16. KP3000

    6 Pages

  17. KR3S

    6 Pages

  18. KR5100

    4 Pages

  19. IR-BZ

    2 Pages

  20. MILA-C5000PN

    4 Pages

  21. KR3000

    6 Pages

  22. Solidpak NC

    6 Pages

  23. Data Scanner

    4 Pages

Archived catalogs

  1. TP

    4 Pages

  2. EH3000 PEN

    4 Pages

  3. KH4000

    6 Pages

  4. KL4000

    6 Pages

  5. AH4000 PEN

    8 Pages

  6. AL4000 PEN

    6 Pages

  7. KR2S

    6 Pages