CEF 2016 - 43 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

  13. P. 40

Catalogue excerpts

Energy and persistence defeat everything

 Open the catalogue to page 1

history CEF was set-up in Florence at the end of the ‘70s as a result of the collaboration between Silvio Fedi, an entrepreneur specializing in electric installations, and Giorgio Bandinelli, a skilful metalmechanic manufacturer. The initial office was located in Florence, where Silvio Fedi sold the products manufactured at Ferrone, which was the location of Bandinelli’s workshop. In time CEF expanded his activities and customer base until it was acquired, back in 1997, by Giorgio Bandinelli and his son Giacomo. Today CEF srl di Giacomo Bandinelli is regarded a synonym of quality and experience;...

 Open the catalogue to page 3

1 - CABLE DRUM STORAGE DISPENSING SYSTEM 5

 Open the catalogue to page 4

CABLE DRUM STORAGE DISPENSING SYSTEM

 Open the catalogue to page 5

CABLE DRUM STORAGE DISPENSING SYSTEM SMALL RACK is a vertical storage system for small reels that can be extended without limitations. Available in heights of 2000 mm or 2500 mm, it is designed to unwind the cable directly from the stored reel without placing the reel on the ground. It is fitted with tubular shafts that rotate around fixed supports. The system offers maximum modularity thanks to the availability of connection bars, which also simplify handling and assembly. GENERAL CHARACTERISTICS • SIDE PANELS: in resistant and light hollow steel cable profiles designed to be installed on the...

 Open the catalogue to page 6

CABLE DRUM STORAGE DISPENSING SYSTEM It is a vertical storage system for cable drums that can be extended without limitations. It is fitted with single sliding shaft holders and a safety system that prevents the drum from coming loose. It makes also possible to move one drum at a time while maintaining the remaining ones in a safe position. The system offers maximum modularity thanks to the availability of connection bars. In this system it is not necessary to align the drums because there are single supports. Bushing shafts made in resin with adjustable drum blocking collars allow a better unwinding. TECHNICAL...

 Open the catalogue to page 7

CABLE DRUM STORAGE DISPENSING SYSTEM CHARACTERISTIC OF THE “RACK” STORAGE SYSTEM • BODY SIDES (Code 0080) in UNP steel, dimensions 100x8mm, for a better resistance and carrying capacity. Other than the similar plate storage systems available on the market, the “Rack” body sides are very resistant and impossible to bend – even after hitting a goods lift. They are self-supporting and painted with scratch-resistant epoxy coating. Holes to fix a stand are available every 100 mm. • SINGLE STANDS (CODE 0025). This system offers a huge liberty of the drums placement. The shafts do not have to be aligned...

 Open the catalogue to page 8

CABLE DRUM STORAGE DISPENSING SYSTEM ALUMINUM ROD For activating the safety devices: light and practical tool to activate the stand safety devices, to substitute the drums on the storage system while maintaining the other drums in a safe position. THE SHAFTS (CODE 0015C.000-30) Are in zinc-coated tubes 30x8 mm, equipped with blocking collars with washer and resin bushings for drums with a smaller hole than the standard one. FLOOR ANCHORING DEVICES COD. 0015CA TWO SELF-CENTERING AND RESISTANT COLLARS Thanks to these collars the drum can be centered and thanks to their cylindrical form the drum...

 Open the catalogue to page 9

Machine for coil assembling. This machine has been designed with the precise aim of minimizing as much as possible the time needed to measure and wind cables on coils. This extremely simple, robust and safe machine allows only one operator to carry out all the daily measurements in a cable warehouse. The machine is easy to handle and suitable to move along an electric cable storage rack. TECHNICAL CHARACTERISTICS Model

 Open the catalogue to page 11

FEATURES OF THE DRUM WINDER • Steel SHAFT with cones. • DRUM BLOCKING CONE for rapid clamping. • DRUM LOADING through insertion of the shaft into the drum hole while the machine is moving • DRUM LIFTING with manual hydraulic cylinder pump working on an oil dynamic cylinder. TECHNICAL CHARACTERISTICS Model FEATURES OF THE MEASURER • Measurer for round cable with diameter from 2 to 50 mm (margin of error +/- 1-2%). • Rubber coated metric wheel for a greater grip and better measuring. • Mechanical meter counter with manual reset. • Manual cable layering through HIWIN guides and sliding blocks for...

 Open the catalogue to page 12

• SPOOL WINDING REEL COD. 6280.0900 • PROGRAMMABLE DIGITAL COUNTER SELET Code 0151 Electronic programmer with setting of the cable measures and slowdown at the preset length. The device can be used also in manual modus as a meter counter. • AUTOMATIC CABLE LAYERING DEVICE CONTROLLED THROUGH PLC TOUCH SCREEN CODE 5311 Controlled through a stepper motor with following settings: trolley starting measure and inversion measure, cable cutting measure with automatic slowdown, trolley speed according to the cable diameter. The settings can be changed while the machine is working. • ELECTROHYDRAULIC GEARCASE...

 Open the catalogue to page 13

Machine for coil assembling. This machine has been designed with the precise aim of minimizing as much as possible the time needed to measure and wind cables on coils. This extremely simple, robust and safe machine allows only one operator to carry out all the daily measurements in a cable warehouse. The machine is easy to handle and suitable to move along an electric cable storage rack. CONTROL PANEL OPTIONS • Power supply 220 V - 50 HZ (optional: 380 V) • Speed adjustment with INVERTER and potentiometer from 0 to 70 rpm. • 1,1 KW gear motor with integrated control panel with emergency stop button...

 Open the catalogue to page 14

FEATURES OF THE FAST SPOOL COIL WINDER • Spool with retractable levers (no need to remove wheels). • Spool diameter 900 mm core 325 mm (with widening capacity for 450 mm core). • Shaft with cones for small drums (on removing the spool the shaft remains with a diameter 30, on which it is possible to wind small drums with steel cones). FEATURES OF THE GAUGE MEASURER • Gauge measurer for round cables with a diameter from 2 to 50 mm. (margin of error +- ½ %) • Metric rubber coated wheel for a better grip and measurement. • Mechanical meter counters with manual reset. • Manual cable layering using...

 Open the catalogue to page 15

All CEXME s.r.l. catalogues and technical brochures