Kilns and Furnaces for Ceramic and Glass
16Pages

Kilns and Furnaces for Ceramic and Glass Firing Sintering Debinding Decorating Drying Bending Slumping Tempering Cooling Fusing Laboratory

Chamber Kilns KK 50/09 – KK 300/14 T max 900 °C – 1400 °C • For temperatures up to 900, 1280, 1340 and 1400 °C • Double-lined casing with rear ventilation > Low outer-casing temperature, corrosion protection due to absence of condensation • With bottom damper and exhaust outlet in top of kiln • High-quality, multilayer insulation with refractory bricks featuring special rear insulation > Low heat loss, low power consumption • Heating from 5 sides (left, right, rear wall, door, bottom) > Extraordinarily uniform temperature distribution • High-quality heating elements > Long service life •...

Bogie-hearth Kilns WK 1000/09 – WK 7000/14 T max 900 °C – 1400 °C • For temperatures up to 900, 1280, 1340 and 1400 °C • Double-lined casing with rear ventilation > Low outer-casing temperature, corrosion protection due to absence of condensation • Kiln door designed for simple and easy operation • Rugged bogie hearth on highly rigid rubber casters > Freely movable, easily steered • Bottom heating elements in the bogie hearth covered with SiC plates > Protection of bottom heating elements, charging made easy by level support • With bottom damper and manually operated exhaust air aps in top...

Chamber and Bogie-hearth Kilns, gas-fired T max up to 1500 °C Performance features of chamber and bogie-hearth kilns: Reliable operation – high quality – low-maintenance • Universal kilns • Superb ring results • Low power consumption due to multilayer reproof lining with best insulation properties • Protection against contamination using optional lining with cordierite plates • Proprietary burner systems with large performance range, specially designed to match the kiln • Automatic control of burner atmosphere • Start-up of kiln at low temperature with high temperature uniformity and...

Applications: • Table ware • Building and sanitary ceramics • Fireproof ceramics • Technical ceramics • Art ceramics • Terracotta • China ware • Glass We supply: • Periodic kilns (chamber and bogie-hearth kilns) • Continuous kiln systems (tunnel kilns) • Dryers • Firing aids Optional equipment: • Conveying equipment, charging and recharging systems • Control and regulation systems • Systems for heat recovery 7

High-temperature Furnaces T max up to 1800 °C Applications: • Research and production • Testing, ring, sintering • Technical ceramics, dental ceramics, new materials We supply: • Chamber furnaces • Bogie-hearth furnaces • Top-hat and elevator furnaces Optional equipment: • Cooling fan • With purging air preheating • Start-up switch • Automatic control of exhaust aps • Catalytic and thermal cleaning of exhaust air • Fully-automated systems for control and regulation • Comprehensive process documentation Ask for our special brochures or visit our website: www.therm-concept.de 8

Chamber Furnaces for debinding ceramics Air-circulation Furnaces up to 750 °C KU 120/75 DB – KU 500/75 DB Debinding technical ceramics requires very homogenous distribution of temperatures in the furnace chamber, especially during the heating-up phase. Air-circulation furnaces are particularly suited to this purpose, because the forced circulation of air in the furnace ensures excellent temperature uniformity in the chamber. These debinding furnaces are also tted with ventilation and automatic exhaust ap control, and the casing is effectively gas-tight. • Furnace casing welded for...

Fusing furnaces T max 1000 °C • Fusing furnaces for temperatures up to 1000 °C • Wide range of standard furnaces, as well as production of customized furnaces • High-performance infrared heating in the hood > Optimal temperature uniformity, resistant to gases possibly released • High-quality bre insulation with rear insulation > Low heat absorption, for short cycle times, low power consumption • Several ventilation ports with refractory dampers > Rapid cooling, also for monitoring the charge • Fitted with exhaust openings, innitely controllable in larger models • Rugged design with base,...

Air-circulation Furnaces for tempering, cooling and decorating of glass T max 450 °C - 850 °C Air-circulation furnaces are used when a very homogenous distribution of temperatures in the furnace chamber is required. Fans ensure that air is properly circulated. A temperature uniformity up to +/- 3 K or better is achieved. Air-circulation furnaces are suitable for tempering, for cooling special glass, and for glass decoration. Air-circulation Chamber Furnaces • Casing made of high-quality steel plates, rugged design • Inner liner made of heat-resistant stainless steel • Fitted with...

Laboratory Muffle Furnaces KL 03/11 – KL 15/12 T max up to 1200 °C Universal mufe furnaces for many laboratory applications, superb value for money. • Temperature ranges: 1100 °C and 1200 °C > Flexibility of use • Stainless steel casing > Long service life, extremely resistant • Hardened bre module as inner chamber > High mechanical resilience, short ring cycles, low power consumption • Heating wire embedded in ceramic plates > Heating wire protected against damage; service-friendly and cost-efcient • Exhaust pipe in rear wall > Any gases possibly released can escape • Door safety switch >...

Laboratory Chamber Furnaces KC 20/13 – KC 120/14 T max 1300 °C and 1400 °C Chamber furnace for complex laboratory applications, up to and including simulation of production processes for temperatures up to 1400 °C. Extremely short heat-up times, excellent temperature uniformity. • Double-lined casing design with rear ventilation > Exceptionally low outercasing temperature, pleasant working conditions • Multilayer insulation made of microporous material and refractory bricks > Low energy consumption, low operating costs • Heated from 5 sides (left, right, door, rear wall, bottom) > Excellent...