Catalogs >
CEDRAT TECHNOLOGIES >
Bistable linear moving magnet BLMM

Bistable linear moving magnet BLMM
2Pages

Catalog excerpts

CTEC: COMPACT, DYNAMIC, PRECISE Dynamic conditions are particularly challenging! They require systems capable of generating or handling large accelerations. Reactivity and reliability of actuators developed by CTEC make them unique for high dynamic applications. However integration and loading conditions being equally important, we invite you to get in touch with our engineers at actuator@cedrat-tec.com to discuss your application. TABLE OF STANDARD PROPERTIES OF USE AND MEASUREMENT The properties defined in the table below, are set up according to the technical conditions of use and measurement. These properties are warranted within their variation range and in compliance with the standard technical conditions of use. NOMINAL VALUES Holding force at rest (Fh) Actuation force at start stroke (Fs) for Inpc Actuation force at end stroke (Fe) for Inpc Commutation time Nominal pulse current Inpc Pulse width Connector Electrical interface (2 wires) Winding resistance Winding inductance Instantaneous Dissipated power Electric Time constant Temperature rise for 1 switch Temperature in steady state for 15 switch/s Moving Mass Actuator diameter size (PCB included) Height actuator (without shaft) Total Mass Copyright © CEDRAT TECHNOLOGIES | 08/2014 Free Length for shaft fastening Diameter Mobile shaft CEDRAT TECHNOLOGIES • 59 Chemin du Vieux Chêne • Inovallée • 38246 MEYLAN Cedex France Bistable linear moving

Open the catalog to page 1