Catalogue - IG-catalogue - CDS Cam Driven Systems - (Version JPG)

See other catalogues for CDS Cam Driven Systems

Elevator, Indexer, Hopper, Linear guide, Positioner

Text version of the page

* Double cycle cam configuration ( see pag 22 )

(•) Starting torque - Tolerance on the values indicated ± 15%

Values referred to the worst running conditions Equivalent Service Factor = 1.75 already applied


Type		Number of Stops S	Index angle (<*°)	Maxim 50 rpm	um output t Spe 100 rpm	orque - Mtu ed - (rpm) 200 rpm	- (Nm) 300 rpm	Mo Acc. Ca	tion coeffic Speed Cv	ients Disp. Ck	Ptc. rad. Rp (mm)	Roller o. d. Dr (mm)	Inertia Jc (kgm²)	Mch.frt (•) Mam (Nm)
IG 63	*	20	90	67	66	66	65	5.53	1.76	5.46	33	14	0.0031	6.8
IG 80	*			107	106	105	103	5.53	1.76	5.46	42	16	0.0053	10.2
IG 82.5	*			107	106	105	103	5.53	1.76	5.46	42	16	0.0053	10.2
IG 100	*			187	186	185	182	5.53	1.76	5.46	54	20	0.0079	15.1
IG 125	*			277	276	273	268	5.53	1.76	5.46	64	25	0.012	23.1
IG 140	_*			453	452	449	443	5.53	1.76	5.46	75	30	0.0147	31.2
IG 160	_*			726	724	715	699	5.53	1.76	5.46	85	35	0.0398	41.7
IG 200	_*			1174	1166	1133	1078	5.53	1.76	5.46	108	40	0.143	59.4

IG 63	_*		120	67	67	67	66	5.53	1.76	5.46	33	14	0.0031	6.8
IG 80	_*			107	107	106	105	5.53	1.76	5.46	42	16	0.0053	10.2
IG 82.5	_*			107	107	106	105	5.53	1.76	5.46	42	16	0.0053	10.2
IG 100	_*			188	188	187	185	5.53	1.76	5.46	54	20	0.0079	15.1
IG 125	_*			278	278	276	273	5.53	1.76	5.46	64	25	0.012	23.1
IG 140	_*			456	455	453	450	5.53	1.76	5.46	75	30	0.0147	31.2
IG 160	_*			730	729	724	715	5.53	1.76	5.46	85	35	0.0398	41.7
IG 200	_*			1182	1177	1159	1128	5.53	1.76	5.46	108	40	0.143	59.4

IG 63	_*		140	67	67	67	66	5.53	1.76	5.46	33	14	0.0031	6.8
IG 80	_*			108	107	107	106	5.53	1.76	5.46	42	16	0.0053	10.2
IG 82.5	_*			107	107	107	106	5.53	1.76	5.46	42	16	0.0053	10.2
IG 100	_*			188	188	187	186	5.53	1.76	5.46	54	20	0.0079	15.1
IG 125	_*			279	278	277	275	5.53	1.76	5.46	64	25	0.012	23.1
IG 140	_*			457	456	455	453	5.53	1 76	5.46	75	30	0 0147	31.2
IG 160	_*			732	731	727	721	5.53	1.76	5.46	85	35	0 0398	41.7
IG 200	_*			1184	1181	1167	1145	5.53	1.76	5.46	108	40	0 143	59.4

IG 63	_*	24	60	57	56	55	53	5.53	1.76	5.46	33	12	0 0031	5.9
IG 80	_*			84	84	82	78	5.53	1.76	5.46	42	14	0 0053	9.0
IG 82.5	_*			84	84	82	78	5.53	1.76	5.46	42	14	0 0052	9.1
IG 100	_*			136	135	132	126	5.53	1.76	5.46	54	16	0.0077	12.3
IG 125	*			219	218	213	205	5.53	1.76	5.46	64	20	0.0116	18.9
IG 140	_*			322	320	315	305	5.53	1.76	5.46	75	25	0 0133	26.4
IG 160	_*			507	503	487	460	5.53	1.76	5.46	85	30	0.0372	36.3
IG 200	_*			910	895	835	735	5.53	1.76	5.46	108	35	0.1389	52.7

IG 63	_*		90	57	57	57	56	5.53	1.76	5.46	33	12	0.0031	5.9
IG 80	_*			107	107	106	104	5.53	1.76	5.46	42	16	0.0054	10.2
IG 82.5	_*			107	107	106	104	5.53	1.76	5.46	42	16	0.0054	10.2
IG 100	_*			188	187	186	183	5.53	1.76	5.46	54	20	0.0081	15.1
IG 125	_*			278	277	275	271	5.53	1.76	5.46	64	25	0.0124	23.1
IG 140	_*			455	454	451	446	5.53	1.76	5.46	75	30	0.0156	31.2
IG 160	_*			729	727	719	705	5.53	1.76	5.46	85	35	0.0418	41.7
IG 200	_*			1179	1172	1143	1096	5.53	1.76	5.46	108	40	0.1476	59.4

IG 63	_*		120	58	57	57	57	5.53	1.76	5.46	33	12	0.0031	5.9
IG 80	_*			108	107	107	106	5.53	1.76	5.46	42	16	0.0054	10.2
IG 82.5	_*			108	107	107	106	5.53	1.76	5.46	42	16	0.0054	10.2
IG 100	_*			188	188	187	186	5.53	1.76	5.46	54	20	0.0081	15.1
IG 125	_*			279	278	277	275	5.53	1.76	5.46	64	25	0.0124	23.1
IG 140	_*			457	456	455	452	5.53	1.76	5.46	75	30	0.0156	31.2
IG 160	_*			732	731	726	719	5.53	1.76	5.46	85	35	0.0418	41.7
IG 200	_*			1185	1181	1165	1138	5.53	1.76	5.46	108	40	0.1476	59.4

IG 63	_*		140	58	58	57	57	5.53	1.76	5.46	33	12	0.0031	5.9
IG 80	_*			108	108	107	106	5.53	1.76	5.46	42	16	0.0054	10.2
IG 82.5	_*			108	108	107	106	5.53	1.76	5.46	42	16	0.0054	10.2
IG 100	_*			189	188	188	187	5.53	1.76	5.46	54	20	0.0081	15.1
IG 125	_*			279	279	278	276	5.53	1.76	5.46	64	25	0.0124	23.1
IG 140	_*			457	457	456	454	5.53	1.76	5.46	75	30	0.0156	31.2
IG 160	_*			733	732	729	723	5.53	1.76	5.46	85	35	0.0418	41.7
IG 200	_*			1187	1184	1172	1152	5.53	1.76	5.46	108	40	0.1476	59.4
Modèle		Nombre de divisions S	Angle detransl. (<*°)	a 50 v/min Couple	a 100 v/min maxi admis Vites	a 200 v/min Mtu - Mtu-se	a 300 v/min (Nm)	Ca Accélér. Lois	Cv Vitesse de mouve	Ck Transmis. ment	R. Moyen Rp (mm)	Dam. Galet. Dr (mm)	Inertie Jc (kgm²)	Frot.m (•) Mam (Nm)

FRA

* Came à deux principes (voir pag.22)

(•) Moment de frottement premier détachem. ■

Tolérance valeurs ± 15%

Valeurs se référant aux moins bonnes conditions d'utilisation Facteur de service = 1,75

IG-catalogue - CDS Cam Driven Systems - #11

Elevator, Indexer, Hopper, Linear guide, Positioner