FT Ring table
24Pages

{{requestButtons}}

Catalog excerpts

FT Ring table - 1

RING TABLE TAVOLE AD ANELLO RING DREHTISCHE TABLES ROTATIVES MESAS GIRATORIAS 环状转台

Open the catalog to page 1
FT Ring table - 2

This catalogue cancels and replaces any preceding issue or revision. The data provided in the catalogue are not binding; in line with our commitment to on-going product improvement, we reserve the right to make changes without prior notice. The technical data not present in this catalog are available from our technical office. When in doubt, you are welcome to download the latest up-to-date version available on our web site: www.cdsindexers.com Importante Questo catalogo annulla e sostituisce ogni precedente edizione o revisione. I dati esposti nel catalogo non sono impegnativi e ci...

Open the catalog to page 2
FT Ring table - 3

 Technische Angaben  Données techniques Datos técnicos  Loads on output flange Cargas en el divisor  输出法兰负载  Carichi sull’albero camma  Charges sur l’arbre à came  Technische Angaben  Données techniques Datos técnicos  FT 1350 Dimensions  FT 1350 Dimensioni  FT 1350 Außenmaße  FT 1350 Dimensions  Directions of rotation  Senso di rotazione  Einseitig gerichtete funktion Función unidireccional  Fitting position reducer  Posizione di montaggio motoriduttore  Position de montage motor

Open the catalog to page 3
FT Ring table - 4

• Grandezze: FT 320-450-590-850-1350 carcassa in ghisa, verniciatura rosso RAL3000 • Größen: FT 320-450-590-850-1350 Gehäuse aus Gusseisen, lackiert rot RAL3000 The FT ring tables utilize an internal cylindrical barrel cam mechanism which meets the following requirements: Le tavole FT sono meccanismi a camma cilindrica che soddisfano i seguenti requisiti: Die FT Rundschalttische werden durch einen zylindrischen Nocken angetrieben und besitzen folgende Eigenschaften: • Self supported housing structure eliminates need for additional machine base or other support • Wide open center provides...

Open the catalog to page 4
FT Ring table - 5

• Dimensiones: FT 320-450-590-850-1350 carcasa de fundición, pintura roja RAL3000 Les tables FT sont des mécanismes à came cylindrique qui satisfont les exigences suivantes: Las mesas FT son mecanismos con levas cilíndricas y satisfacen las siguientes necesidades: • Structure auto portante qui ne nécessite pas de supports supplémentaires. Ceci facilite l’utilisation et fournit une meilleure planéité et répétibilité • Grand trou traversant complètement utilisable • Roulement à 4 points de contact positionné sur le diamètre externe du disque diviseur. De cette façon, les frictions et les...

Open the catalog to page 5
FT Ring table - 6

Fa = Axial force (N) Fr = Radial Force (N) Mr = Overturning moment (Nm) da,dr = Distance (m) Fa = Forza assiale (N) Fr = Forza radiale (N) Mr = Momento ribaltante (Nm) da,dr = Distanza (m) LOADS ON OUTPUT FLANGE Fa = Längskraft (N) Fr = Radialkraft (N) Mr = Kippmoment (Nm) da,dr = Abstand (m) Mr = Fr • dr Mr = Fa • da

Open the catalog to page 6
FT Ring table - 7

Fa = Force axiale (N) Fr = Force radiale (N) Mr = Moment renversé (Nm) da,dr = Distance (m) Mr = Fr • dr Mr = Fa • da Fa = Fuerza axial (N) Fr = Fuerza radial (N) Mr = Momento de vuelco (Nm) da,dr = Distancia (m) Fa = 轴向力(N) Fr = 径向力(N4) Mr = 倾覆力矩(Nm) da,dr = 距离 (m) ●● The diagram shows the combination of axial load and tilt moment for a calculated lifetime of 10.000h at rpm*. Radial loads are not considered. ●● Il grafico mostra la combinazione del carico assiale e del momento ribaltante per una vita di 10.000h calcolato in rpm*. I carichi radiali non sono considerati. ●● Das Diagramm...

Open the catalog to page 7
FT Ring table - 8

The diagrams show the curves referred to maximum value (Fre/Me) for the input shaft of the tables. The values are referred to maximum value a rotation speed of 100 rpm of the cam-shaft. CHARGES SUR L’ARBRE À CAME Die Diagramme zeigen die mit Bezug auf die für die Antriebswelle der verschiedenen Tische. Die angegebenen Werte beziehen sich auf eine Kurven Höchstwerte von (Fre/Me) Wellendrehzahl von 100 U/min. Les diagrammes représentent les courbes relatives aux valeurs maxi de (Fre/Me) pour l’arbre d’entrée des différentes tables. Les valeurs indiquées se réfèrent à une vitesse rotation de...

Open the catalog to page 8
FT Ring table - 9

The FT series are a large open center ring style indexing & positioning tables designed for heavy duty industrial applications La serie FT presenta un foro centrale generoso e una ralla rulli incrociati particolarmente adatta per applicazioni gravose Die mit zentraler großer Mittelbohrung versehenen Rundschalt- und Positioniertische der FT -Reihe wurden für Schwerlast-Anwendungen entworfen La série FT est une couronne rotative de positionnement destinée aux applications industrielles à forte charge La serie FT son mesas de indexación y posicionamiento del tipo anillo, con un amplio espacio...

Open the catalog to page 9
FT Ring table - 10

TECHNICAL DATA  DATI TECNICI  TECHNISCHE ANGABEN DONNEES TECHNIQUES  DATOS TÉCNICOS  技术数据 Type Maximum output torque - Mtu (Nm) 25 rpm 50 rpm 75 rpm 100 rpm

Open the catalog to page 10
FT Ring table - 11

TECHNICAL DATA  DATI TECNICI  TECHNISCHE ANGABEN DONNEES TECHNIQUES  DATOS TÉCNICOS  技术数据 Type Maximum output torque - Mtu (Nm) 25 rpm 50 rpm 75 rpm 100 rpm Values referred to the worst running conditions. Equivalent service factor = 1.75 already applied Valori riferiti alle peggiori condizioni di utilizzo. Fattore di servizio applicato equivalente = 1.75 Werte mit Bezug auf die ungünstigsten Anwendungsbedingungen äquivalenter Betriebsfaktor = 1.75 Valeurs se référant aux pires conditions d’utilisation. Facteur de service = 1.75 Valores referidos a la peores condiciones de uso. Factor...

Open the catalog to page 11
FT Ring table - 12

Reference Riferimento Bezug Référence Referencia 参考 Concentricity Planarity Concentricità Planarità Konzentrizität Planheit Concentricité Planéité Concentricidad Planaridad 同心度 平面度 Repeatability ● Ripetibilità Wiederholbarkeit Répétitivité ● Repetibilidad 重复精度 Std Threaded holes position Posizione fori filettati Löcherposition Position des trou taraudé Posición orificios roscados 螺纹孔位置精度 Tolerance in compliance with ● Tolleranze s

Open the catalog to page 12

All CDS Cam Driven Systems catalogs and technical brochures

  1. HT Ring table

    20 Pages

  2. FTP Ring table

    24 Pages