STN series - 8 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

Catalogue excerpts

Available upon request PP-GF (Polypropylene-Glass filled) - ETFE (Ethylene tetrafluoroethylene) CFR-ETFE (Carbon filled - Ethylene tetrafluoroethylene)

 Open the catalogue to page 1

STN The synchronous drive configuration STN is based on an outer magnet ring STANDARD EXECUTION with Motor assembly built to magnetically couple with an inner magnet ring assembly. together by the flux of attracting magnet poles flowing through the containment isolation shell. Application Fields ETFE (Ethylene tetrafluoroethylene) • CFR-ETFE (Carbon filled - Ethylene • tetrafluoroethylene) - *only casing Suitable for handling corrosive, aggressive and hazardous liquids (low viscosity, clean or slightly contaminated) in the chemical applications. STN Made with a reliable quality as the ETN but...

 Open the catalogue to page 2

Inner and Duter magnets are equipped with rare earth permanent magnets. Patented cage magnet attachment guarantees stability during the operation of the pump. The STN are available in close coupled execution suitable to be coupled with standard electrical motors High chemical resistance Alternative available materials The casing's design is reinforced by a Sealless design Total containment, essential for hazardous, aggressive or valuable

 Open the catalogue to page 3

• Available in ETFE, CFR-ETFE and PP-GF • Standard casing drain for a complete and fast draining of the casing • ETFE Non-metallic double Isolation Shell configuration on wet side, externally reinforced by a As alternative, it is available made by Zero Eddy Current Losses thanks to non-metallic execution • The integral design of the impeller misalignment problem, also reducing • Standard back vanes reduce axial thrust and seal chamber pressures to guarantee an extraordinary bearing • Axial and radial loads are well distributed thanks to the highly reliable rotating parts design. The static shaft can...

 Open the catalogue to page 4

^SECTIDNAL DRAWING Electric Motors 0.75 kW (motor size 80) -> 4 kW (motor size 112) Temperature range * as option : Flanges ISO 1092 PN16RFor ANSI 150 RF Allowable Solids Max concentration 2 % by weight / Max particle size 0,10 mm

 Open the catalogue to page 6

OVERALL DIMENSION FLANGED EXECUTION

 Open the catalogue to page 7

For further info, please visit www.cdrpompe.com R Pompe S.P.A. C.D.R. Pompe S.p.A. Via P. Togliatti, 26/A - 20030 Senago (MI) - Italy Tel. +39029901941 Fax +39029980606 www.cdrpompe.com info@cdrpompe.it TB - STN 2012.01 Technical Characteristics The technical data and characteristics stated in this General Catalogue are not binding. CDR Pompe S.p.a. reserves the right to make modifications without notice. Therefore data, dimensions, performances and any other stated issues are indicative only and not binding. Anyway for any technical details you must require an up-to-date product technical card.

 Open the catalogue to page 8

All C.D.R. Pompe catalogues and technical brochures

  1. UCS / UCS-B

    8 Pages

    En
  2. UTS

    12 Pages

    En
  3. UCL / UCL-B

    12 Pages

    En
  4. UTN-L / UTN-BL

    12 Pages

    En
  5. UCN-L / UCN-BL

    12 Pages

    En
  6. HTS series

    4 Pages

    En
  7. ETN series

    8 Pages

    En
  8. ETS series

    8 Pages

    En
  9. HTN

    4 Pages

    En

Archived catalogues