ETS series - 8 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

Catalogue excerpts

ETS Metallic Magnetic Drive Centrifugal Pumps Comply to : 2006/42/CE Design to : Sub-ISO 2858 ATEX 100 Directive 94/9/EC Flanged UNI 1092-1 (ISO 7005-2 ) PN16RF type B ETS 50 WITH MOTOR slotted ANSI 150RF Metallic Magnetic drive Horizontal - Single Stage - Centrifugal pumps R Sub-ISO designed Materials : AISI 316 (1.4401) Close-coupled execution Pompe S.P.A.

 Open the catalogue to page 1

ETS Mag drive concept Versatility With smaller plants come smaller hydraulic The synchronous drive configuration ETS 30 with Motor is based on an outer magnet ring assembly built to magnetically requirements, which lend themselves to sub-ISO sized pump units to offer optimum pump efficiency and longer MTBF (Mean time Between Failure). couple with an inner magnet ring assembly. Reliability Suitable for handling aggressive, toxic and These two magnet rings are locked together by the flux of attracting magnet poles flowing through the hazardous liquids (low viscosity, clean or slightly contaminated)...

 Open the catalogue to page 2

3D VIEW Inner and Outer magnets are equipped with NdFeB (neodymium iron boron) or SmCo (samarium cobalt) permanent magnets. Sealless design Total containment, essential for hazardous, aggressive or valuable product. Metallic Sealless Magnetic Drive Pumps suitable for service up to 140 °C (optional execution available to reach 180 °C). The ETS series is designed with a rotating metallic Patented cage magnet attachment guarantees shaft supported by single static bushing. stability during the operation of the pump. Minimal downtime / fast maintenance The clever execution allow the end user to easy...

 Open the catalogue to page 3

FEATURES IMPELLER CASING • Bonus casing thickness made by AISI 316 (CF8M) minimum 3 mm corrosion allowance • AISI 316 (CF8M) construction maximizes casing life against corrosion and • erosion • Standard One piece solid cast stainless steel The problem of reverse rotation during start-up has been eliminated casing drain for a thanks to the key driven system complete and fast draining of the casing ISOLATION SHELL • • • The design allows to the Isolation Shell to be self-venting and fully drainable The rib on the bottom is a perfect vortex breaker which increases the lifetime INNER MAGNET • Magnets...

 Open the catalogue to page 4

SECTIONAL DRAWING ETS Connections • • ETS 30/40 Flanged ISO 1092-1 PN10RF slotted ANSI 150 RF ETS 50/70 Flanged ISO 1092-1 PN16RF slotted ANSI 150 RF Viscosity Allowable Solids R Pompe S.P.A. ETS 40 : DN40/DN32 ETS 70 : DN50/DN32 1cSt min - 100 cSt max Max concentration 2 % by weight Max particle size 0,10 mm Painting Coating Quality Technical Specifications ETS 30 : DN32/DN25 ETS 50 : DN40/DN25 Lantern GS400 ( C40*- AISI316* ) * special execution Bushings Support AISI 316L (CF3M) Joint Ring (Casing) PTFE/Armored Grafoil Spacer Ring PTFE/Armored Grafoil Thrust Bearing SiC Bearing Sleeve SiC 545...

 Open the catalogue to page 6

ERALL DIMENSION * L1 dimension is according to installed motor manufacturer ** Flanges dimensions according to UN11092-1 ISO \ 7005-1 PN16 type B - slotted ANS1150 RF

 Open the catalogue to page 7

For further info, please visit www.cdrpompe.com R Pompe S.P.A. C.D.R. Pompe S.p.A. Via P. Togliatti, 26/A - 20030 Senago (MI) - Italy Tel. +39029901941 Fax +39029980606 www.cdrpompe.com info@cdrpompe.it TB - ETS 2012.01 Technical Characteristics The technical data and characteristics stated in this General Catalogue are not binding. CDR Pompe S.p.a. reserves the right to make modifications without notice. Therefore data, dimensions, performances and any other stated issues are indicative only and not binding. Anyway for any technical details you must require an up-to-date product technical card.

 Open the catalogue to page 8

All C.D.R. Pompe catalogues and technical brochures

  1. UCS / UCS-B

    8 Pages

    En
  2. UTS

    12 Pages

    En
  3. UCL / UCL-B

    12 Pages

    En
  4. UTN-L / UTN-BL

    12 Pages

    En
  5. UCN-L / UCN-BL

    12 Pages

    En
  6. STN series

    8 Pages

    En
  7. HTS series

    4 Pages

    En
  8. ETN series

    8 Pages

    En
  9. HTN

    4 Pages

    En

Archived catalogues