NINON MIX : labelling machine to apply labels on flat sided and cylindrical containers - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

CDa Chabot Delrieu Associes NINON MIX According to options machine outfitted with: MOTORIZED SLATE BAND CONVEYOR Anodised aluminium profile, created by CDA; receiving an acetal slate band conveyor, width 82,5 mm Adjustable stainless steel guides, diameter 12mm, are adjustable to allow the passage of products from 30mm to 140 mm width on single conveyor ■ The motorized conveyor is built on a stainless steel frame, outfitted with blue side panels in which the electrics & electronics are integrated. It is built on wheels or on adjustable feet A pneumatic selection system is installed at the inlet of the conveyor, outfitted with one or two cylinders according to product size. According to required outfit: A large rotating reception table 0 700 mm is built at the outlet of the conveyor to recollect the labelled products A square reception table is installed at the outlet of the conveyor A transfer system is built at the end of the conveyor CDA - 6 rue de l'artisanat - ZI Plaisance 11100 Narbonne-France Tթl : +33(0)4.68.41.25.29 Fax: +33(0)4.68.41.64.97 - contact@cdafrance.com

 Open the catalogue to page 1

LABELLING One labelling station to apply labels on a flat sided or slightly oval products including: One label dispenser for front labels, adjustable in height and width. Width adjustment stroke: 75 mm. For products from 30 mm to 140 mm width ■ One label dispenser for back labels, adjustable in height and width. Width adjustment stroke: 75 mm. For products from 30 mm to 140 mm width ■ A system to realign the products before labelling for flat or slightly oval products ■ A motorized belt conveyor built on a motorized lift is installed above the labelling station to stabilize the products when being...

 Open the catalogue to page 2

DIGITAL DISPLAY Validation zones Adjustment settings ■ Bottle counter Label positioning Rթgulation of production rate and process timing Positioning memorizing - 50 positions llBBIISIB^! ■ Labelling height adjustment ■ Process error detection and self-diagnosis ٕ OPTIONS ■ Lot marking with hot foil coder ■ A detection cell to apply an additional label on already labelled products ■ A notch detection cell to apply and position labels on notched products ■ A vision camera to detect designs or shapes ■ Additional conveyor length ■ Swivelling table on labelling station ■ System to realign the products...

 Open the catalogue to page 3

Configuration machine with options : system to realign the products + upper stabilization belt + 2 labelling stations for flat-sided products and 2 labelling stations for round products + 1 rotating table TECHNICAL DESCRIPTION Performance Up to 1 500 products/hour according to diameter and labelling Up to 2 500 products/hour according to diameter and labelling. Approximate weight in kgs 250 kgs Machine width 1663 mm (according to configuration) Machine height 1170 mm Machine length 2788 mm (according to configuration) Conveyor height 925 mm Control By digital display Absorbed power 2kw Power supply...

 Open the catalogue to page 4

All CDA catalogues and technical brochures

  1. Ninette 1

    2 Pages

    En
  2. Lystop II

    4 Pages

    En
  3. Léa

    3 Pages

    En
  4. Ninette Auto

    3 Pages

    En
  5. Stick

    2 Pages

    En
  6. Ninette Tube

    2 Pages

    En
  7. REGIONALE

    4 Pages

    En
  8. Ninette 2

    2 Pages

    En
  9. Ninon By-Pass

    3 Pages

    En
  10. Ninette Flat

    2 Pages

    En