NINON 2500 M&B : in line labeller for cylindrical product - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

CDa Chabot Delrieu Associes MOTORIZED SLATE BAND CONVEYOR Anodised aluminium profile, created by CDA; receiving an acetal slate band conveyor, width 82,5 mm ; double conveyor if required by the dimensions of the product to be labelled. Adjustable stainless steel guides, diameter 12mm, are adjustable to allow the passage of products up to 110mm diameter on single conveyor, 220 mm on double conveyor The motorised conveyor is built on a stainless steel frame, outfitted with blue side panels in which the electrics & electronics is integrated. It is built on wheels or on adjustable feet According to the products to be labelled, a selection system is installed at the inlet of the conveyor. Either a multi-format selection screw regulated by frequency converter or a pneumatic selector with one or two cylinders according to product size According to required outfit: A large rotating reception table, 0 700mm, is built at the outlet of the conveyor to recollect the labelled products A square recollection table is installed at the outlet of the conveyor A transfer system is built at the end of the conveyor CDA - 6 rue de l'artisanat - ZI Plaisance 11100 Narbonne-France Tթl : +33(0)4.68.41.25.29 Fax: +33(0)4.68.41.64.97 - contact@cdafrance.com

 Open the catalogue to page 1

LABELLING One labelling station to apply labels on cylindrical products including: One label dispenser for front labels One label dispenser for back labels One label dispenser for a third label The label dispensers are outfitted with asynchronous motors regulated by frequency converters ■ All label dispensers are built on motorized up & down lifts to adjust the labelling height. ■ The labelling height is adjusted through the digital display Label height from 8 to 300 mm Machine production rate, front/back label: up to 2 500 products an hour according to size and labelling type Adjustment and memorizing...

 Open the catalogue to page 2

OPTIONS Lot marking with hot foil coder A dթtection cell to apply an additional label on already labelled products A notch detection cell to apply and position labels on notched products ■ A vision camera to detect designs or shapes ■ Additional conveyor length ■ A special guiding device for cone shaped bottles ■ Ink jet lot marker ■ Ultrasonic label detection sensor for transparent labels ■ Clutched support plate for heavy label reels. ■ Alarm light mast to notify dysfunctions ■ Sensor to detect the end of the label roll ■ Detection sensor to detect a missing label on the product to be labelled...

 Open the catalogue to page 3

All CDA catalogues and technical brochures

  1. Ninette I

    2 Pages

    En
  2. K-LINE

    2 Pages

    En
  3. Lystop II

    4 Pages

    En
  4. Léa

    3 Pages

    En
  5. Ninette Auto

    3 Pages

    En
  6. STICK

    2 Pages

    En
  7. Ninette TUBE

    2 Pages

    En
  8. REGIONALE

    4 Pages

    En
  9. Ninette II

    2 Pages

    En
  10. Ninon By-Pass

    3 Pages

    En
  11. Ninette Flat

    2 Pages

    En