Catalogs >
Caterpillar Equipment >
953D WH Waste Handler Track Loader

953D WH Waste Handler Track Loader
8Pages

Catalog excerpts

Engine Model Cat® C6.6 ACERT™ Capacity-MP Landfill

Waste Handling Arrangement Tailored for waste applications. Final Drive Seal Guards Protects the Duo Cone seal against wrapping of wires or plastics. Hydraulic Reversible Fan Purges the debris from the air inlets by reversing the airflow. Limits radiator plugging and increases maintenance interval. Turbine Precleaner Increase engine air filter life by pre-cleaning the air. Guard, Idler and Lift Lines Protects and limits the entry of debris into the tensioning system and lift lines. It includes scrapers mounted around idler. Rubber Mounted Windshield Makes the windshield replacement easy and...

Open the catalog to page 3

Options Tailored for waste applications. Center Holes Shoes The center holes in the track allow sprocket to punch out dirt and debris, that prevents an increase of track wear caused by an abnormal track tension. This is the best choice in landfill. Striker Bars Very useful in landfills, the striker bars removes waste from the tracks to prevent damaging the fenders and the cab. Equipped with a step, it facilitate the access to the cab from the rear. General Purpose Bucket – Landfill This trash rack increases the standard bucket capacity to move low density materials. Multi-Purpose Bucket –...

Open the catalog to page 4

953D Waste Handler Specifications Engine Flywheel Power Engine Model Buckets 110 kW 148 hp ® Cat C6.6 ACERT™ • Engine ratings at 2,000 rpm. • Meets the U.S. EPA Tier 3, European Union Stage III A and Japan MLIT Step 3 Emission regulations. • Net flywheel power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator. • No derating required up to 3000 m (9,842 ft) altitude. Undercarriage Track Shoe Width – Standard Track Shoe Width – Optional Track Gauge Track on Ground Ground Contact Area – Standard Shoe Ground Contact Area...

Open the catalog to page 5

All dimensions are subject to change without notice. 1 Overall machine width without bucket: with standard tracks - 480 mm (19.7 in) shoes 2280 mm 89.7 in with narrow tracks - 380 mm (14.9 in) shoes 2180 mm 85.8 in 4 Length to front of track 4363 mm 171.7 in 5 Overall machine length* 6252 mm 246.1 in 6 Carry position approach angle 15° 8 Maximum rollback at ground 41° 9 Maximum rollback at carry position 48° 10 Bucket height in carry position 548 mm 21.6 in 11 Reach at full lift height and 45° dump* 1195 mm 47 in 12 Clearance at full lift height and 45° dump* 2694 mm 106 in 13 Maximum...

Open the catalog to page 6

953D WH Standard Equipment Standard equipment may vary. Consult your Cat dealer for details. For standard equipment, please refer to the 953D Track Loader information. 953D WH Optional Equipment Optional equipment may vary. Consult your Cat dealer for details. ELECTRICAL Lights, 4, extra Beacon, rotating OPERATOR ENVIRONMENT Control, joystick, MP bucket Control, two levers, GP bucket Comfort seat, air suspended, heated Cab window, front sealed Cat Messenger POWER TRAIN Fan, demand, reversible Tank fuel, fast fill Air inlet, pre-cleaner, turbine HYDRAULICS Hydraulic oil, bio Oil change, high...

Open the catalog to page 7

953D Waste Handler For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com © 2009 Caterpillar Inc. All rights reserved Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Caterpillar dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without...

Open the catalog to page 8