TSGY
4Pages

{{requestButtons}}

Catalog excerpts

TSGY - 1

* Refrigeration & Climate Components Solutions Anti-acid filter driers with liquid sight glass Filtering and drying of refrigerants and acid neutralization for liquid lines of refrigerating and air conditioning installations. Immediate and direct monitoring of flow, condition or moisture content of the refrigerant in its liquid or diphasic phase in refrigerating Functional features CARLY advantages • Products are compatible with HFCs, HCFCs, CFCs, as well as with their associated oils and additives. Products are designed for use of non-hazardous refrigerants from group 2 of PED • Product classification in CE categories is done with the PED 97/23/EC table, corresponding to a volume-based selection. • Filtering at outlet preventing propagation within the circuit of particles bigger than 12 microns. • No desorption, even at a high temperature. •Visualisation of refrigerant through glass. • A moisture indicator sensitive to moisture and resistant to acids is positioned under the glass. • Moisture presence is characterised by a modification of the indicator colour; this modification is reversible. •The sight glasses die-cast brass body guarantees perfect 'Great drying and acid neutralization capacity at all tempe-ratures, thanks to a rigorous selection and a judicious mix of the chemical agents present in the filter driers (activated alumina in order to neutralise the acids and molecular sieves to adsorb moisture). > Initial drying capacity guaranteed by a 200°C oven drying 'A dispenser located at the intake ensures optimal distri- bution and permanent treatment of the whole refrigerant, inside the filter drier. 'The large size of the glass and the absence of a central hygroscopic tip ensure excellent visibility. ■ The sealed design and the seaming principle of the chosen glass ensure perfect air-tightness. 'Two product fitted and tested in a factory, warranty of ■ GOST certified products. Non-binding documents

Open the catalog to page 1
TSGY - 2

2 g * Refrigeration & Climate Components Solutions Anti-acid filter driers with liquid sight glass * Filter driers are to be mounted on the liquid line between the receiver and the expansion element. * The refrigerant flow direction is indicated by an "in" mark in the inlet shell of the filter drier and by an arrow on the filter drier tag. It must be necessarily respected. * Be careful to properly select the solenoid valves located downstream of the filter driers; their over-sizing could cause liquid hammer phenomena hindering the filter driers' mechanical behaviour; protection of...

Open the catalog to page 2
TSGY - 3

Refrigeration & Climate Components Solutions 2 J Anti-acid filter driers with liquid sight glass (V The working pressure is limited to the PS BT value when working temperature Is lower than or equal to TS BT value. 0 Classification by volume, according to PED 97/23/EC (refer to Chapter 0 page 7). Non-binding documents

Open the catalog to page 3
TSGY - 4

2 g * Refrigeration & Climate Components Solutions Anti-acid filter driers with liquid sight glass Non-binding documents

Open the catalog to page 4

All CARLY catalogs and technical brochures

  1. DDCY

    5 Pages

  2. FILTRY

    3 Pages

  3. CCY F

    5 Pages

  4. DDNCY

    4 Pages

Archived catalogs

  1. Check valves

    5 Pages

  2. Ball valves

    4 Pages

  3. Oil filters

    2 Pages

  4. Oil separators

    10 Pages