catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
|
|
|
|
|
|
|
You may also be interested in
Solar inverter, PIR detector, Digital controller, Emergency stop, Safety module
Text version of the page
RJCS
2 t for fusing (t = 10 ms)1800 A
2 s18000 A
2 s On-state voltage drop @ rated current1.6 Vrms1.6 Vrms Critical dV/dt off-state1000 V/”s1000 V/”s
2T1 1L1 24V GND Alm Ctrl 2T1 1L1 24V GND Alm Ctrl 24V GND +_ 24 VDC Notes:1. Control input (terminal A1) and 24VDC supply (terminal A3) must have common ground 2. RJCSc ... and PLC should be sourced from the same 24VDC supply 3. RJCSc ... PO and RJCSc ...NO should not be connected to the same alarm line 4. It is recommended that up to 6 identical loads are connected in parallel Specifications are subject to change without notice (05.07.2007)
Solid State Relays RJCS1A23D30EPNO - 6077 Output Specifications
RJCS.1...30RJCS.1...50 Rated operational current AC51 @Ta=25șC30 AACrms50 AACrmsMeasuring rangeRJCS1A...-8 - 50 ACrms RJCSR1A...0.3 - 30 AACrms0.5 - 50 AACrmsMin. TEACH currentRJCS1A...-8 AACrms RJCSR1A...0.3 AACrms0.5 AACrmsMin. partial load currentRJCS1A...-1.3 AACrms RJCSR1A...0.05 AACrms0.083 AACrms Non rep. surge current (t=10ms)600 Ap1900 Ap Off-state leakage current @rated voltage and frequency2 t for fusing (t = 10 ms)1800 A
2 s18000 A
2 s On-state voltage drop @ rated current1.6 Vrms1.6 Vrms Critical dV/dt off-state1000 V/”s1000 V/”s
Connection Examples
Alarm/Remote + 4-32VDC 0V Alarm/Remote + 4-32VDC 0V24 VDC ~ ~ 100k150E 150E100k ~ LOAD ~ LOAD 3A1:Control input 4-32VDC5A3:Alarm output PNP opencollector6A4:Supply 24VDC4A2:GND 0V 2T1 1L15A33A1 4A26A4 3A1:Control input 4-32VDC 5A3:Alarm output NPN opencollector6A4:Supply 24VDC4A2:GND 0V 2T1 1L15A33A1 4A26A4 24 VDC + - + - OUTPUT INPUTOUTPUTOUTPUT PLC2T1 1L1 24V GND Alm Ctrl 2T1 1L1 24V GND Alm Ctrl 24V GND +_ 24 VDC Notes:1. Control input (terminal A1) and 24VDC supply (terminal A3) must have common ground 2. RJCSc ... and PLC should be sourced from the same 24VDC supply 3. RJCSc ... PO and RJCSc ...NO should not be connected to the same alarm line 4. It is recommended that up to 6 identical loads are connected in parallel Specifications are subject to change without notice (05.07.2007)