Text version of the page

CCW-109

Epoxy Bonding Compound

DESCRIPTION TECHNICAL DATAAPPLICATION PROPERTIES CURED PROPERTIESWARNINGS AND HAZARDS

CCW-109 is a multi-purpose, two-component, 100%- solids, liquid epoxy adhesive that creates durable and permanent bonds between concrete and such materials as wood, metal, masonry and skid-resistant aggregate. Typical applications include bonding curbs, repairing cracks, building up depressions in balconies and sidewalks and as a aggregate-ï¬� lled topping on interior and exterior surfaces. When CCW-109 is used to bond concrete, it provides a seal at the interfacing and this bonded interfacing is, in fact, stronger than concrete itself. When fully cured, CCW-109 is resistant to alkaline chemicals, petroleum products, water, seasonal weather changes and attacks by abrasion. ColorPart A (base resin) Part B (hardener)Clear, light amber Available in limited colorsConsistencyPourable, self-leveling Solids Content98-100% Mixing Ratio1:1, A:B, by volume Pot LifeUnï¬� lled With Aggregate 40 min @ 77ºF60 min @ 77ºFTack-Free Time5 hrs @ 77ºF Cure Time For Pedestrian Trafï¬� c For Vehicular Trafï¬� c12 hrs @ 77ºF24 hrs @ 77ºF

TYPICAL USE

CCW-109 is supplied in the liquid state for use as a general purpose adhesive and concrete surfacing compound. The user may add inert � llers, such as sand or gravel, to make a trowelable mortar. Thus, CCW-109 has great fl exibility for the � nal user. Typical examples of how CCW-109 has been used are: Tensile Strength5,600 psiCompressive Yield Strength12,800 psi Ultimate Flexural Strength10,000 psi Hardness (Shore D)85

AS AN EPOXY ADHESIVE

• Attaching precast concrete parts to existing concrete.• Bonding wood, metal or plastic to concrete surfaces.
* Individual lots may vary +/- 10% from Typical Value

AS AN EPOXY MORTAR

• Patching spalled and damaged areas in concrete. • Filling and leveling of chuck holes and for bringing low areas to proper grade.• Resurfacing of exterior concrete fl oors and other commercial areas where degradation of concrete is common. Uncured epoxy compounds may produce irritations following frequent and prolonged contact with the skin. Avoid breathing vapors and avoid contact with skin, eyes or clothing. The use of gloves, aprons, protective creams or other protective devices is recommended. In case of skin contact, wash thoroughly with soap and water. If contact with eyes is made, fl ush thoroughly with clear water and get medical attention.Before use, refer to MSDS for important warnings and safety information.

AS AN EPOXY AGGREGATE BINDER

• Reï¬� nishing of fl oor surfaces that must be subjected to heavy trafï¬� c.• To form a protective and decorative topping with excellent resistance to alkalies and water or for areas subjected to heavy trafï¬� c.• Sealing and skid-prooï¬� ng waterproofed concrete or wood surfaces by scattering abrasive onto the tacky CCW-109.

INSTALLATION

SURFACE PREPARATION: Concrete surfaces must be free of dirt, paint, oil, grease, loose scale and other contaminates. Where applicable, sandblasting or mechanical grinding is recommended. Oil and grease can be removed by washing and scrubbing with a strong detergent and then thoroughly rinsing with clean water. Repeat if necessary until surface no longer beads water. CCW-109 will cure in the presence of residual moisture, but free-standing water or puddles must be removed and the surface allowed to dry.

PACKAGING

CCW-109 is available in 2-gallon and 10-gallon units.Shelf life 12 months from date of manufacture when stored at 85ºF or below.