CCW MiraDRAIN - 5 Pages

Drainage Composites •Waterproofing Membranes • Deck Coatings • Air & Vapor Barriers Drainage Composites •Waterproofing Membranes • Deck Coatings • Air & Vapor Barriers
800.527.7092 | www.carlisle-ccw.com 800.527.7092 | www.carlisle-ccw.com
C A R L I S L E C O A T I N G S & W A T E R P R O O F I N G C A R L I S L E C O A T I N G S & W A T E R P R O O F I N G
DRAIN Property Test Method Unit 2000 5000 6000/6200 6000/6200XL 8000(woven) 9000
Core - - - - - - - - - - - - - - - - - - - - - - - - - - - - Typical Values- - - - - - - - - - - - - - - - - - - - - - - - - - - -
Thickness ASTM D1777 in (mm) 0.25 (6.35) 0.40 (10.16) 0.40 (10.16) 0.40 (10.16) 0.40 (10.16) 0.40 (10.16)
Compressive Strength ASTM D1621 psf (kN/m2) 10,800 (517) 15,000 (719) 15,000 (719) 16,500 (790) 18,000 (862) 18,000 (862)
Maximum Flow Rate1 ASTM D4716 gpm/ft (l/min/m) 12.5 (155) 15 (188) 17 (211) 17 (211) 21 (260) 21 (260)
Installed Vertically2 ASTM D4716 gpm/ft (l/min/m) 8.5 (106) 12.5 (155) 12.5 (155) 14.5 (180) 18.5 (230) 18.5 (230)
Installed Horizontally3 ASTM D4716 gpm/ft (l/min/m) X 2.4 (30) X X 3.8 (47) 3.8 (47)
Fabric
Apparent Opening Size ASTM D4751 US Std Sieve (mm) 40 (0.42) 40 (0.42) 40 (0.42) 70 (0.21) 40 (0.42) 40 (0.42)
Water Flow Rate ASTM D4491 gpm/ft2 (l/min/m2) 200 (8,148) 200 (8,148) 200 (8,148) 110 (4,477) 145 (5,907) 145 (5,907)
Grab Tensile Strength ASTM D4632 lbs (kN) 80 (0.36) 80 (0.36) 80 (0.36) 160 (0.71) 365 (1.62) 365 (1.62)
Grab Elongation ASTM D4632 % 60 60 60 50 24 24
Puncture Resistance ASTM D4833 lbs (kN) 95 (0.42) 100 (0.44) 100 (0.44)
System
Performance Index * 14,050 18,250 18,250 24,100 27,198 27,198
DRAIN Property Test Method Unit 9800 9900 QuickDRAIN GR9200 MiraDRAIN HC
Core - - - - - - - - - - - - - - - - - - - - - - - - - - - - Typical Values- - - - - - - - - - - - - - - - - - - - - - - - - - - -
Thickness ASTM D1777 in (mm) 0.40 (10.16) 0.25 (6.35) 0.63-1.0 (16.0-25.4) 0.40 (10.16) 1 (25.4)
Compressive Strength ASTM D1621 psf (kN/m2) 18,000 (862) 33,000 (1650) 9,500 (455) 15,000 (718) 9,500 (455)
Maximum Flow Rate1 ASTM D4716 gpm/ft (l/min/m) 17.5 (219) 13 (161) 118 (928) X X
Installed Vertically2 ASTM D4716 gpm/ft (l/min/m) 15.5 (193) X X X 82 (1300)
Installed Horizontally3 ASTM D4716 gpm/ft (l/min/m) 3.0 (38) 2.4 (30) X See TDS 21 (260)
Fabric NW/Woven
Apparent Opening Size ASTM D4751 US Std Sieve (mm)80 (0.18) 40 (0.42) 70 (0.21) 70/40 (0.21/0.42) 40 (0.42)
Water Flow Rate ASTM D4491 gpm/ft2 (l/min/m2) 95 (3,866) 145 (5,907) 110 (4,477) 140/145 (5,698/5,907) 200 (8,148)
Grab Tensile Strength ASTM D4632 lbs (kN) 205 (0.90) 365 (1.62) 160 (0.71) 100/365 (0.45/1.62) 80 (0.36)
Grab Elongation ASTM D4632 % 50 24 50 50/24 60
Puncture Resistance ASTM D4833 lbs (kN) 130 (0.58) 100 (0.44) 95 (0.42) 65/100 (0.30/0.44)
System
Performance Index * 31,325 42,198 17,100 X 12,750
PHYSICAL PROPERTIES: MIRADRAIN 2000 • 5000 • 6000/6200 • 6000XL/6200XL • 8000 • 9000
PHYSICAL PROPERTIES: MIRADRAIN 98000 • 9900 • QUICKDRAIN • GR9200 • MIRADRAIN HC
All flow rates were tested at 3600 psf. 1In plane flow rate @ gradient of 1.0 2Installed flow rate @ vertical gradient of 1.0 with soil or concrete overburden 3Installed flow rate @ horizontal
gradient of 0.05 with soil or concrete overburden.
* Drainage Performance Index is a function of ASTM D 4833, D 4632 and D 1621 ® Contact Carlisle Coatings & Waterproofing for performance values in these applications. NW=Nonwoven
CCW MIRADRAIN 2000
An economical drainage solution for shallow
depth foundation walls. Its intermediate flow
rate and compressive strength make CCW
MiraDRAIN 2000 ideal for residential and
light commercial applications.
• Compressive Strength: 10,800 psf
• Core Thickness: 0.25 in
• Maximum Flow Rate: 12.5 gpm/ft
• Geotextile Fabric: non-woven
• Performance Index: 14,050
CCW MIRADRAIN 5000
This system is designed for applications
where two-sided drainage is required.
With a non-woven geotextile filter fabric
bonded to both sides of a pierced dimple
core, CCW MiraDRAIN 5000 is most effective
in promoting soil stability while intercepting
and removing ground water. Ideal for
use as a trench drain or interceptor drain.
• Compressive Strength: 15,000 psf
• Core Thickness: 0.40 in
• Maximum Flow Rate: 15 gpm/ft
• Geotextile Fabric: non-woven
• Performance Index: 18,250
CCW MIRADRAIN 6000/6200
For years, CCW MiraDRAIN 6000 and 6200
have been the industry standard for highflow,
high-compressive strength, vertical
single-sided subsurface drainage applications.
CCW MiraDRAIN 6200 is designed
for use over MiraDRI Waterproofing
Membranes. The high-strength polymeric film
adhered to the flat side of the drainage core
protects the waterproofing membrane from
potential die cutting.
• Compressive Strength: 15,000 psf
• Core Thickness: 0.40 in
• Maximum Flow Rate: 17 gpm/ft
• Geotextile Fabric: non-woven
• Performance Index: 18,250
CCW MIRADRAIN
6000XL, 6200XL
CCW MiraDRAIN 6000XL and 6200XL
provide important improvements over the
trusted CCW MiraDRAIN 6000/6200 products,
designed for use in high-flow, high-compressive
strength, vertical drainage applications
where single-sided subsurface drainage
is needed. The new and superior highstrength
filter fabric provides greater filtration
for a wider range of soil conditions,
higher survivability during installation, and
greater long-term performance.
CCW MiraDRAIN 6200XL is designed for
use over CCW Waterproofing Membranes.
The high-strength polymeric film adhered to
the flat side of the drainage core protects
the waterproofing membrane from potential
die cutting.
• Compressive Strength: 16,500 psf
• Core Thickness: 0.40 in
• Maximum Flow Rate: 17 gpm/ft width
• Geotextile Fabric: non-woven
• Performance Index: 24,100
CCW MIRADRAIN 8000
Utilizing a high-impact PVC core,CCW
MiraDRAIN 8000 is recommended for
applications where chemical run-off is a
consideration, such as airports, helicopter
pads, and industrial sites. It is resistant to
petrochemicals and suitable for subgrade
drainage around storage tanks. Available with
a standard woven geotextile fabric, or with
non-woven geotextile fabrics.
• Compressive Strength: 18,000 psf
• Core Thickness: 0.40 in
• Maximum Flow Rate: 21 gpm/ft
• Geotextile Fabric: woven
• Performance Index: 27,198
CCW MIRADRAIN 9000
The industry leader for high-compressive
strength horizontal applications, this geocomposite
sheet drain features a high-strength
woven geotextile fabric, which limits the
intrusion of the fabric into the drainage
channels under load. The woven fabric is
better suited to receive a directly poured
concrete topping than non-woven geotextile
fabrics. Ideal for use in plaza deck, parking
deck and split slab construction.
• Compressive Strength: 18,000 psf
• Core Thickness: 0.40 in
• Maximum Flow Rate: 21 gpm/ft
• Geotextile Fabric: woven
• Performance Index: 27,198
CCW MIRADRAIN 9800
The superior, heavyweight, non-woven geotextile
fabric on the new CCW MiraDRAIN
9800 provides unmatched filtration, preventing
small particles of soil from clogging
the drainage channel while allowing the
water to flow through the dimple core
and into the discharge system. Its high
compressive strength meets the needs of
most horizontal applications. Ideal for use
on green roofs, landscaping and planters.
• Compressive Strength: 18,000 psf
• Core Thickness: 0.40 in
• Maximum Flow Rate: 17.5 gpm/ft
• Geotextile Fabric: non-woven
• Performance Index: 31,325
CCW MIRADRAIN 9900
With 33,000 psf and a flow rate exceeding
that of a geonet by more than 90%, the compressive
strength of this system exceeds all
geocomposite sheet drains and geonets available
today. Its woven geotextile fabric is suited
to receive a directly poured concrete topping.
CCW MiraDRAIN 9900 withstands the
stresses and strains caused by vehicular
traffic and other high compressive strength
situations. Ideal for use on plaza decks, split
slab construction and in locations that
encounter emergency traffic.
• Compressive Strength: 33,000 psf
• Core Thickness: 0.25 in
• Maximum Flow Rate: 13 gpm/ft
• Geotextile Fabric: woven
• Performance Index: 42,198
CCW QUICKDRAIN
CCW QuickDRAIN replaces costly conventional
perforated pipe/aggregate collection
systems for drainage of foundation and
retaining walls. The high-profile, threedimensional
core functions as an edge
drain/pipe collector to transport the groundwater;
the high-strength fabric acts as a filtering
medium to allow the inward passage of
water while retaining soil particles without
clogging. Used in conjunction with CCW
MiraDRAIN, CCW QuickDRAIN provides
an uninterrupted drainage flow path. With its
patented hinged design,CCW
QuickDRAIN is installed in an “L” configuration
that is 50% more efficient than
competitive products while protecting the
most critical waterproofing detail.
• Compressive Strength: 9,500 psf
• Core Thickness: graduated
• Maximum Flow Rate 118 gpm/ft width
• Geotextile Fabric non-woven
• Performance Index 17,100
CCW MiraDRAIN GR9200
CCW MiraDRAIN GR9200 is designed
specifically for green roofs, garden roofs
and large planter applications. Used with
CCW waterproofing, this drainage composite
provides adequate water retention for
sedums, grasses and plant life, while providing
a channel for excess water to drain.
• Compressive Strength: 15,000 psf
• Core Thickness: 0.40 in
• Maximum Flow Rate: .14-.28 gpm/ft
• Retention Performance 31%-17%
CCW MiraDRAIN HC
CCW MiraDRAIN HC provides water flow
for demanding applications that encounter
high volumes of water. This system is
designed for applications where two-sided
drainage is required. HC utilizes the threedimensional
cone with non-woven fabric in
both punched and non-punched configurations
(for greater water flow control).
• Compressive Strength: 9,500 psf
• Core Thickness: 1.0 in
• Maximum Flow Rate: 81 gpm/ft
• Geotextile Fabric: non-woven
• Performance Index: 12,750

CCW MiraDRAIN
  1. P. 1

    mbranes • Sheet Membranes • Butyl Membranes • Drainage Systems • Air & Vapor Barriers • Deck Coaaterproofing Systems...
  2. P. 2

    2 3451678THE EVOLUTION…Drainage plays a critical role in the designand construction of below-grade applications.Without proper drainage, groundwaterseepage...
  3. P. 3

    2000* 5000 6000 6200 8000 9000 9800 9900 GR9200 HC6000XL 6200XLBelow-Grade Walls Deeper than 10 ft. • • • •Foundation Walls •...
  4. P. 4

  5. P. 5

    CCW WEB LIMITED WARRANTYCarlisle Coatings & Waterproofing, Incorporated (Carlisle) warrants this product to be free ofdefects in workmanship and materials...
Text version

All Carlisle Coatings & Waterproofing catalogues and technical brochures

  1. CCW GreenRoof

    6 Pages

    En
  2. CCW MiraCLAY

    2 Pages

    En
  3. CCW-500R

    2 Pages

    En