CCW 5013-C Decorative Pedestrian - Carlisle Coatings & Waterproofing - #1

/ 2


catalogue search
CCW 5013-C  Decorative Pedestrian - Carlisle Coatings & Waterproofing
P. 01
CCW 5013-C  Decorative Pedestrian - Carlisle Coatings & Waterproofing
P. 02
Pages:
CCW 5013-C  Decorative Pedestrian - Carlisle Coatings & Waterproofing


See other catalogues for Carlisle Coatings & Waterproofing
You may also be interested in

Resin, Silicone sealant, Adhesive, Silicone, Floor covering


Text version of the page
CCW-5013C
Decorative Pedestrian Traffic Deck System
Irl
Coatings & Waterproofing
DESCRIPTION
CCW-5013C is a waterproofing system consisting of a one-part polyurethane Base Coat, a tough polyurethane aggregate binder that holds decorative quartz or other colored aggregates and a clear, non-yellowing polyurethane Top Coat. The system prevents water from entering occupied space below, protects the surface from environmental damage by water and salts and provides a safe, uniquely attractive walking surface.
TYPICAL USE
The CCW-5013-C System is used for waterproofing patios, balconies, plaza decks, sun decks, terraces and other areas subject to pedestrian foot traffic.
LIMITATIONS
• Do not apply primer or coatings to a frosty, damp or wet surface.
• Do not proceed with coating application if temperature is below 40T or if rain is imminent within 8 hours after application. Cure time is slower in cool weather.
• Polyurethane coating cure times may be significantly
faster than listed when temperature and/or humidity are high.
• If metal pan is used for concrete form, the pan must be vented. Not for use on grade.
• If deck has a between-slab membrane, consult with Carlisle representative.
• CCW-502 Intermediate Coat must not be left exposed to light. Use enough aggregate to completely cover the Intermediate Coat.
PACKAGING
CCW-501 Base Coat, CCW-502 Intermediate Coat and CCW-503-C Top Coat:
5-gallon pails and 55-gallon drums
CCW-501-T Detail Coat:
5-gallon pails
Shelf life 12 months from date of manufacture when stored at 85T or below.
APPLICABLE STANDARDS
ASTM C957-93
TOP COAT COLORS
Standard colors in stock include Stone Gray and Colonial Gray. Additional standard and custom colors are available, minimum orders may apply.
TYPICAL PROPERTIES* CCW-501 BASE COAT
PROPERTY
METHOD
TYPICAL VALUE
Solids Content
ASTM C1250
85%
Hardness, Shore A
ASTM D2240
63
Tensile Strength
ASTM D412
850 psi
Tear, Die C
ASTM D412
625%
Recoat Time*
ASTM D624
140 lb/in
Adhesion to Concrete
ASTM D903
23 PLI
Low Temp Flexibility
ASTM D522
-65T
CCW-502 INTERMEDIATE COAT
PROPERTY
METHOD
TYPICAL VALUE
Solids Content
ASTM C1250
80%
Hardness, Shore A
ASTM D2240
82
Tensile Strength
ASTM D412
2000 psi
Tear, Die C
ASTM D412
425%
Recoat Time*
ASTM D624
300 lb/in
Low Temp Flexibility
ASTM D522
-65T
CCW-503-C CLEAR TOP COAT
PROPERTY
METHOD
TYPICAL VALUE
Composition
ASTM C1250
Aliphatic Polyurethane
Hardness, Shore A
ASTM D2240
91
Tensile Strength
ASTM D412
3200 psi
Tear, Die C
ASTM D412
190%
Recoat Time*
ASTM D624
300 lb/in
Weather Resistance
ASTM G53
Non-chalking, non-yellowing
Abrasion Resistance**
ASTM C501
<50 mg
Permeability**
ASTM E96 (B)
<1.0 perms
* Individual lots may vary +/- 10% from Typical value ** System
WARNINGS AND HAZARDS
Before use, refer to MSDS for important warnings and safety information. Use only in areas with adequate ventilation. Avoid breathing vapors. Keep away from heat and flame. Avoid contact with eyes and skin. In the event of skin contact, remove immediately and wash with warm, soapy water. Wear eye protection. Always wash hands before eating.

pageCatalog pdf di En 2012-05-22-28