| | | | | | | | | | | | | | |
| | | |
| | | ScanMax®. Easy to operate. | | |
| | | |
| | | Checking a diameter? Place the part on the measuring surface and measure. It only takes a few seconds. You will receive high quality results. Faster and more accurate than with any other gage. | | |
| | | |
| | | You see what you measure. Menues simplify your measuring task. On completion of the scanning process, the work-piece is displayed on screen as an easy-to-oper-ate 3D graph, even with complex measurement tasks. An interactive help system is always available to assist you. Define the workpiece reference point from the production drawing and move the articulated arm to scan the contour of the workpiece. In addition to the display, you will receive a printout similar to a CAD drawing. This permits direct comparison between the measured data and the drawing dimensions. The resulting corrective values are entered directly into the NC program of the machine tool. In this way, each machine operator is in control of production quality. | | |
| | | ScanMax® is operated by shopfloor personnel. ScanWare supports the operator by visualizing measurements and interactively controlling the measuring process in the background. | | |
| | | |
| | | User interfaces Whatever the measuring task, ScanMax® always offers the optimum operational routine: ^ "3d measuring slide" for fast measurements, "Repeat measurement" for a graphically predefined program run without the need for keyboard entry, ^ "Learn programming" for defining the measuring strategy of repeat measurements. | | |
| | | |
| | | |
| | | 8 | | |
| | | |
| | | | | | | | | | | | | | |