Configuration and Upgrade levels

PRO

®

-Platform: the right measur-ing machine for all requirements.

RDS-CAAPH10M 2.5°Angle7.5°20736Number of positions720350 mm PECFTP6 extension200 mm PAA350 mm PECFTP20 extension300 mm PAA6 minLength of calibration for 50 pos.180 minJoystickManual swivelwith HCU1
Comparison ofRDS-CAA and PH10M: while the standard calibration method requires 3 hours for only 50 angular positions,the entire calibration procedure with RDS-CAA needs only 6 minutes for all angular positions. The machine strategy behind thePRO ®

Sensor system

line is based on a comple-tely new platform strategy. All three product lines consist of a common base and can be “upgraded” at any time. This enables all three models, whetheron the floor or flush floor, to becustomized to the current work- ing conditions. All three product lines offer maximum throughput at minimum cost. â—� PRO
® is equipped with a new interface designfeaturing a multi-sensor interface (MSI). The inter-face design makes it possible to retrofit different sensors and sensor mounts at any time. â—� PRO
® Premium is equipped with DSE and RST-P exworks. PRO Premium can be equipped withEagleEye Navigator for fast, touch-free measur- ing. â—� PRO
® Compact and PRO
® Select come standardwith RDS-CAA and RST-P or TP 6. The TP 20,PH10M and MIH sensors are optional. â—� The Y measuring range remains unchanged witharticulating and non-indexing sensor mounts.
6 6