For spur gears

GEAR PRO involute –effectively measure spur gears

GEAR PRO involute was specially developed tomeasure spur gears. The required input for theparameters of the gear geometry is visualized in windows using simple graphics. CAD-supported GEAR PRO involute software allowsmeasurements with and without a rotary table. It is ideal for twist measurements, optional flankmeasurements with different tolerances and measurements with asymmetrical tolerances or different geometries of the two flanks. Measuring with GEAR PRO involute is characterizedby high flexibility as the operator can define severalmeasuring runs per measurement plan and turn features on or off. It is also possible to scan accord- ing to a planned or actual path. Thus, it is also pos- sible to perform measurements of large deviations. Types of gears

•

Exterior and interior, straight and slanted tooth spur gears with an involute profile

•

1 to 1000 teeth

•

Module greater than 0.5 mm

•

Helix angle up to 89.5°

•

Special gearing with interrupted flank lines, missing teeth and segment gearing Evaluation

•

In accordance with the standards: DIN 3962, DIN 3974 for worms, AGMA 2000-A88,ISO 1328, JIS B1702, free specification of the tolerance values and company-specific standards

•

Profile, line, pitch and concentricity

•

Statistical evaluation via interface to Q-DAS qs-STAT
6