| A prerequisite for Gage R&R Alignment can be critical in Gage Repeatability and Reproducibility. When a part is removed and replaced (shown at top), it isn't necessarily placed in the same position - which causes different results when measuring only 4 points. With scanning, even if the part is removed or replaced and not in the same position, you will get correct and repeatable results. Key benefits of ZEISS scanning • Fast scanning of form features for prismatic workpieces featuring circles, cylinders, cones, planes and even single point for basic tasks. • Scanning of known contours for curves and free-form surfaces and unknown contours, ideal for digitizing in tool and moldmaking. • Self-centering probing for grooves or cavities. • Automatic selection of scanning speed based on the required accuracy. |