E-SYSTEM: high pressure three components dosing unit for Epoxy resin - 2 Pages

E-System High pressure three components dosing unit for Epoxy resin The "E-System" model is an extremely compact and rational high pressure dosing unit, specificaLLy designed for ESTRIM [Epoxy Structural Reaction Injection Moulding), a process based on the right mix of technologies able to achieve short cycle times and automated production of Composites. Cannon "E-System" machines can be used in place of RTM process with the folLowing characteristics:  Metering, mixing and injection of a properly formulated family of liquid Epoxy components in a closed mould, reducing the demoulding times from 20-30 minutes (RTM) to 2-3 minutes Օ CLosed-loop controlled metering System which guarantees optimum repeatability of the dispensed weight from shot to shot avoiding overfilling of the moulds  Self-cleaning mixing technoLogy MixingHeads The "E-System" dosing machines are supplied in combination with dedicated mixing heads: Օ LN5  FPL10 Օ TRI07  LS10 spray RATIO by weight Resin/Hardener/Release Agent_ TOTAL OUTPUT [g/s)_ Above data are calculated with a resin viscosity of 1,500 cPs E-System 100:25:2 min max ~~25 Վ6- POLYURETHANE TECHNOLOGY

E-SYSTEM: high pressure three components dosing unit for Epoxy resin
  1. P. 1

  2. P. 2

    ~ Release Agent Circuit 5 Hardener Circuit ■ Base Circuit @®©Tank ©YFilter © Feeding Pump © Heat Exchanger © Filter...
Text version

All Cannon Group catalogues and technical brochures

  1. SPOT LX

    2 Pages

    En
  2. Maxfoam

    8 Pages

    En
  3. Easymax

    4 Pages

    En
  4. L MH

    2 Pages

    En
  5. FPL AN MH

    2 Pages

    En
  6. FP2L mH

    2 Pages

    En
  7. AX MH

    2 Pages

    En
  8. FPL

    2 Pages

    En
  9. 955 Vertifoam

    4 Pages

    En
  10. System-LRes

    8 Pages

    En
  11. 917JL

    1 Pages

    En
  12. Cannon JL

    1 Pages

    En

Archived catalogues

  1. Potting

    2 Pages

    En