Camozzi Catalogue - News 2009 - CAMOZZI - #10

Text version of the page

The company reserves the right to vary models and dimensions without notice. Products designed for industrial applications. Sale to general public is forbidden. MOVEMENT MOVEMENT > Cylinders Series 62 CATALOGUE > Release 8.1 01 1 1/1.26 Cylinders Series 62 - Aluminium profile New Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, (ISO 15552) The Series 62 cylinders have been designed to comply with the dimensions laid down in the ISO 15552 standards. A permanent magnet is integrated in the piston which enables the detection of the piston’s position, by means of proximity switches (Series CSH) mounted in grooves along one side of the cylinder profile. These grooves can be covered with a slot cover profile Mod. S-CST-500. These cylinders are equipped with adjustable end-stroke cushioning. They are also equipped with a mechanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke. GENERAL DATA ISO 15552 (DIN/ISO 6431/VDMA 24562) Rolled stainless steel rod Clean and light design Adjustable pneumatic cushioning » » » » Type of construction with tie-rods (inside the profile) Operation double-acting Materials aluminium end-blocks, NBR seals, other parts see coding Type of mounting with tie-rods, front flange, rear flange, feet front and rear trunnion, swivel combination Stroke min - max 10 ÷ 2500 mm Operating temperature 0°C ÷ 80°C (with dry air -10°C) Special designs see coding example Operating pressure 1 ÷ 10 bar Speed 10 ÷ 1000 mm/sec (NO LOAD) Fluid clean air, lubrication if lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. Proximity switch to use CSH