Camozzi Catalogue - Guided Cylinders - CAMOZZI - #2

Text version of the page

The company reserves the right to vary models and dimensions without notice. Products designed for industrial applications. Sale to general public is forbidden. CATALOGUE > Release 8.1 MOVEMENT > Cylinders Series QC 1 01 1/4.05 Cylinders with integrated guide Series QC Double-acting, magnetic piston, guided ø 20, 25, 32, 40, 50, 63 The Series QC compact cylinders have been designed to be used in applications where space is limited. These cylinders are available in two versions, one with sintered bronze bushes (model QCT) and the other with linear ball bearings (model QCB). The QCT version would normally be selected when the side loads applied to the cylinder are high. Model QCB cylinders are suitable for high precision and fast cycling applications. Both models are equipped with fixed cushioning to prevent direct impact with the end covers. The design of the cylinder body allows the mounting of the cylinder using either top, bottom or side faces. Several “T” shaped grooves in two faces allow sensors to be fitted in a number of positions. GENERAL DATA Magnetic sensors can be mounted on both sides Two versions: Ball bearing guide and bronze bushings Movement and guidance in one unit » » » Type of construction compact guided QCT = sintered bronze bushes QCB = linear ball bearings Operation double-acting Materials - anodized AL body - flange zinc-plated steel - rolled stainless steel piston rod AISI 303 - PU seals rolled stainless steel 420B columns (QCT) hardened steel C50 columns (QCB) PU seals Mounting threaded and non-threaded holes in the body Strokes min. max see table Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Speed 50 ÷ 500 mm/s Operating pressure 1 ÷ 10 Bar Fluid clean air, non lubricated If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.