Camozzi Catalogue - Flow Control Valves - CAMOZZI - #3

Text version of the page

The company reserves the right to vary models and dimensions without notice. Products designed for industrial applications. Sale to general public is forbidden. CATALOGUE > Release 8.1 CONTROL > Valves Series SCU, MCU, SVU, MVU, SCO, MCO 2 01 2/7.05 Flow control valves Series SCU-MCU-SVU-MVU-SCOMCO Flow control valves Banjo flow controllers Unidirectional and bidirectional Ports M5, G1/8, G1/4, G3/8, G1/2 These unidirectional and bidirectional flow controllers have been designed as small as possible so as to be mounted directly on valves or cylinders. The great variety of adjustable fittings makes it possible to complete the regulator with the most suitable system in relation to the available tube. Only the G1/2 model is supplied complete with banjo flow controllers. For the other models the banjo flow controller is to be requested separately. GENERAL DATA Construction needle type Valve group unidirectional and bidirectional controller Materials body and regulation screw: M5 = stainless steel; 1/8 - 1/4 - 3/8 - 1/2 = OT; seals = NBR Mounting by male thread Ports M5 - G1/8 - G1/4 - G3/8 - G1/2 Installation in any position Operating temperature 0°C ÷ 80°C (with dry air - 20°C) Operating pressure 1 ÷ 10 bar Nominal pressure 6 bar Nominal flow see graph Nominal diameter M5 = 1,5 mm - G1/8 = 2 mm - G1/4 = 4 mm - G3/8 = 7 mm - G1/2 = 12 mm Fluid filtered air