Electronic locking swing handle 7025
2Pages

Electronic locking swing handle Lock engaged, handle closed Lock retracted, handle closed Secure cabinet Lock retracted, handle released Lock engaged, handle released Electronic unlocking Manually operated handle Key operated lock override Features • Remote lock and unlock control • Single or multi-point locking This electronic locking swing handle (or rack handle) provides the functionality of a manual latching system with the added benet of electronic locking for access control and remote monitoring. It can be combined with any access control device for a basic selfcontained electronic access solution. Alternatively, the electronic swing handle can provide access control over the internet. Integrated lock sensors provide LED indication on the handle and generate output signals for remote access monitoring. • Integrated sensors detect lock and handle status for monitoring and alarm functions • Low power, motor driven gear mechanism Electronic locking swing handle Highlights • Low energy consumption (less than 200mA at 12vDC) • Momentary or continuous lock actuation • Activated via any third party control system (access control, PDU, SCADA) • Key-operated lock provides mechanical override • Fits industry standard panel preparations • Accommodates both left and right hand doors • 2 metres (78.7”) wiring harness and hardware kit included OPTIONAL ACCESSORIES NOT REQUIRED FOR MOST RETROFIT APPLICATIONS Gearbox (for multi-point system) • Supplied with three keys (keyed alike) Left hand Right hand Cams Grip Measurement Web: www.camlock.com 3 Park View, Compton Industrial Estate, Eastbourne, East Sussex, BN23 6QE, United Kingdom Tel: +44 (0)1323 410 996 • Fax: +44 (0)1323 411 512 • E-mail: enquiries@camlock.com

Specications Material & finish Housing, handle, mounting bracket: glass-lled nylon, black Shaft, rotation limiter: die-cast zinc, bright sealer Electrical specications See Notes for frame edge distance Status indicator Frame edge 170.6mm (6.71”) 32mm (1.26”) Cam centreline Recommended operating voltage: 12vDC to 24vDC Typical operating current: less than 200mA at 12vDC Peak / stall operating current: 1amp Standby current: 50mA max. Output signal rating: 200mA max. load Connector pin assignment PIN 1: Ground (-) PIN 2: Power (+) PIN 3: Not used PIN 4: Control signal PIN 5: Electronic lock...