WOOD WORKING - Camfil Farr Air Pollution Control - (Version JPG) - Page n° 2 - PDF Catalogue | Technical Documentation

FARR Application Focus on Wood Working Sizing Recommendations

several ditte

wood working machinery that create very different types

curly strings of

;rb, lame material

s, and planners will create long

or shavings, especially on softer

woods like yellow pine. High speed belt sanders will

creat« flour.

a very fine dust that may be referred to as wood hop saws and table saws will create saw dust

which is typically the easiest dust to handle.

On all wood applications

with a Gold Series the

Hemipleat cartridges

should be used. If 100 percent of

a high speed sander or saw, over

the m

idler i

uagb may neip i not a necessity.

ncrease the life of the cartridge, but are

Overbags should always be used with molders, planners

and lathes. The air to cloth ratio

Wim nemipiecH discharge should

cartridges should be 2:1. The hopper

be no less than 14" square. Machined airlocks should never be used, but a fabricated flex type airlock will work well on this type of material. If a high pressure pneumatic convey system is used to take the material away from the collector, a wood feeder should be considered. A wood feeder is very similar to a machined

The Gold Series has proven itself to work very well on difficult Laser and Plasma Cutting applications. The Gold Series works on applications where most other dust collectors have failed.

airlock but is mas it enters the

luuii ne. feeder.

vier and can shear the material

One last note in designing the system. CNC routers require 6,000 to 7,000 FPM at the head so the static pressure loss at these types of machines can be 7-10" W.C. A booster fan may be needed at the machine to meet the airflow and static pressure demands.

Key benefits:

• High filtration efficiency

• Excellent energy performance

• Long element life

Gold Cone Cartridge

Camfil Farr Gold Series cartridges have an expanded capacity due to the patented inner Gold Cone. This inner cone increases media area and provides uniform dispersion of back-pulsed air. It also opens up more useable space for air flow in the filter.

WOOD WORKING APPLICATION FOCUS USERS

Munford High School Sears Trostel Lumber Hill-Rom Company Fairport Boces Garmin International

Kountry Kraft Kitchens Cabrillo Cabinets Haworth Furniture Bertch Cabinets Princeton University

Air Pollution Control

Farr APC is a proud member of the Camfil Farr family.

800-479-6801

www.farrapc.com 870-933-8048 Jonesboro, AR email: filterman@farrapc.com

Additional APC offices and factories in Laval, Canada (450-629-3030), and UK 44 (0) 1706 238 000

Rohde Bros.

Ledegar Sheet Greene, Tweed & Co.

Gold Series- Looks like a safe because it's built like a safe.

REFERENCES

Kountry Kraft Cabinets • Elvin Hurst Jr. • 610-589-5747 Bertch Cabinets • Jim Senn • 319-296-2987

WOOD WORKING - Camfil Farr Air Pollution Control - #2

Bag dust collector, Filter cartridge, Compact dust collector, Dust collector, Modular dust collector