Cameron's NuFlo Scanner 2000 microEFM - Cameron - #1

/ 4


catalogue search
Cameron's NuFlo Scanner 2000 microEFM - Cameron
P. 01
Cameron's NuFlo Scanner 2000 microEFM - Cameron
P. 02
Cameron's NuFlo Scanner 2000 microEFM - Cameron
P. 03
Cameron's NuFlo Scanner 2000 microEFM - Cameron
P. 04
Pages:
Cameron's NuFlo Scanner 2000 microEFM - Cameron


See other catalogues for Cameron

Text version of the page
CAMERON
MEASUREMENT SYSTEMS
LO™
Scanner 2000 microEFM
2TX
The NuFlo Scanner 2000 microEFM packs the gas, steam, and liquid measurement capabilities traditionally found in large flow computers into a compact, low-power instrument.
Simplicity and ease of use are integral to this instrument's design. Basic parameters can be configured quickly from a keypad inside the enclosure. All other parameters are easily configured using a PC or laptop and the ModWorX™ Pro software provided free with every Scanner 2000 purchase.
The Scanner 2000 is an economical chart recorder replacement, a flow computer, and a stand-alone totalizer. Its measurement capabilities include compensated gas, steam, and liquid measurements based on the differential pressure input supplied by an orifice plate or a cone meter, or the frequency input from a turbine meter. A turbine input can be used for liquid measurement or compensated gas measurement in accordance with AGA-7. Modbus® protocol and two RS-485 communication ports allow remote communication to host systems. The instrument's ability to measure gas and water simultaneously is also a clear advantage for coalbed methane operators.
The Scanner 2000 microEFM is available in two packages: an explosion-proof package certified for use in hazardous areas, and a weatherproof package.
Explosion-proof Package
The explosion-proof package features:
• an integral MVT
• Lithium battery (standard) for autonomous power
• External power supply A:| (6-30 VDC) optional with ' internal battery backup
• Keypad for basic configuration inside the enclosure
Mounting options include:
• Direct mount to an orifice meter or cone meter using a flange-by-flange manifold
• Remote mount to an orifice meter or cone meter using a pole mount kit
• Direct mount to a Barton 7000 Series turbine meter
The explosion-proof package (both with and without the expansion board) has received the following approvals:
• CE approved
• ATEX-certified, II 2 GD Ex d IIC T6 IP68 (-40°C to 70°C)
• CSA-certified for US and Canada Class I, Div. 1, Groups B, C, D, Type 4 enclosure, single seal
• Measurement Canada certified for custody transfer, Approval No. AG-0557C
• ASME pressure vessel code compliant pressure sensor; CRN 0F10472.5C
Options include:
• Explosion-proof control switch
5 Push-button control of display parameters and daily log views 5 Eliminates need to open enclosure
• Explosion-proof communications adapter 5 Quick connect to laptop
5 Installs in conduit opening for easy access
5 Eliminates need to open enclosure
• Pole mount kit
Weatherproof Package
The weatherproof package features:
• an 8-in. square -^mubiB
Options include:
• Solar kit (solar charger and two rechargeable 6V batteries; solar panel sold separately)
• Radio kit
• Pole mount kit
Mounting options include:
• Direct mount to an orifice meter or cone meter using a flange-by-flange manifold
• Remote mount to an orifice meter or cone meter using a pole mount kit
• The weatherproof package has not been tested or certified for use in hazardous areas.
enclosure
Scunner SOOO
• an integral MVT
• USB connection for downloading data to a laptop
• Lithium battery (standard) for autonomous power
• External power supply (6-30 VDC) optional with internal battery backup
• Solar power optional with internal battery backup
• Keypad for basic configuration inside the enclosure

pageCatalog pdf di En 2012-05-21-23