Text version of the page

MEASUREMENT SYSTEMS

CLIF MOCK™

Cameron's Clif Mock True Cut "C" Series Samplers - 25235 True Cut ™ “C” Series Samplers

For more than three decades, the electrically powered C Series inline sampler has been one of the most accurate and reliable methods of extracting a product sample from a pipeline for basic sediment and water (BS&W) analysis.

C-Series Probe

The C-Series isokinetic inline samplingprobe (shown assembled with a controller) requires neither air nor hydraulics to capture samples. Rather, the probe is actuated by an electrical pulse from a controller, and uses existing pipelinepressure to fill the sample chamber withproduct. When the probe is actuated, a sample chamber opens, allowing process fluid to flow through the chamber. As the window rotates, the sample is captured in its natural state and fed by pipeline pressure to a receptacle. By ensuring that the process fluid is well-mixed and homogenous prior to sampling, and using a sampling process that collects thesample directly from the flow streamwithout changing the linear velocity or direction of flow, the customer is assured of obtaining a representative sample. The C Series sample probe is available in two models: •The C21 probe collects one sample (1.5 cc) per each 360°rotation.•The C22 probe collects two samples (3 cc) per each 360°rotation. Each model is available in two operatingpressure ranges (see Specifications table below). A “V” is used to identify low- operating-pressure probes. All C Series probes are suitable for sampling in 2-in. to 48-in. pipelines.

Tanker loading/unloading systems Truck terminals Pipeline measurement Refineries/pipelines LACT units Loss control Custody transfer points Petrochemical plants Process vessels Barge facilities H2S service