The BX-243 operator is powered by a 24V motor Bx-243

Thanks to the testing it has undergone to bring it up to European standards in terms of the impact forces generated by the gate leaf movement, BX-243 is the product which offers the highest safety standards for its intended use. A complete operator, equipped with encoder-based movement control. The ideal solution for residential installations.

protected within the gearmotor assembly. > Built-in end points thanks to its connection to a tripolar cable and the horizontally positioned card. > Simplified installation > Signal led

The electronics The rangeLimits to use

Besides the normal control and safety functions, BX-243’s new electronics provide certain peculiarities which al- low for total control of the operator and optimisation of its functions, such as: built into the control board to pro- vide easy diagnosis of the systems functions. EN12445 – EN12453 Compliant. Through the ENCODER, the dedicated panel constantly controls the gate leaves’ movement allowing for safe thrust, and is EU standard compliant. Blackouts no more! BX-243’s 24V electronics automatically detects any lack of power and activates the emergency mode which works on (accessory) batteries built-into the assembly. BX-243LB90
Gate leaf width (m) Gate leaf weight (Kg) 8.5 300Operator complete with control board, for sliding gates weighing up to 300 kg and maximum 8.5 m long.Card for connecting two 12V – 1.2Ah emergency batteries. Easy release. Thanks to the practical fitted release lever which is protected by a locked door, even manual release during emergen- cies becomes a quick and simple pro- cedure.

DimensionsStandard installation Technical features

33512,5 105117,5 Photocell Flashing lightAntenna Photocell Photocell Gate plate Switch 149161212 114 149 298 TypeProtection rating Power supply (V) Motor power supply (V) Current draw (A) Max power (W) Traction force (N) Duty cycle (%) Opening time 90° (m/min) Operating temperature (°C) BX-243IP54 230 A.C. 50/60 Hz 24 D.C. 7 max 170 300 intensive use 12 -20 ÷ +55
BX-243 operatorControl board Radio receiver Photocell Electric cable junction box The data and information shown in this catalogue are subject to change without the obligation to give prior notice by Came cancelli automatici S.p.A. Made in Italy

Camecancelli automatici s.p.a.