Catalogue Cambridge Sensortec Catalogue 2006
www.cambridge-sensotec.co.uk
print switch display
Page / 52
Contact the
Manufacturer
Where to buy
this product ?
Request
a Quote
Cambridge Sensotec -
/ 52
See other catalogues for Cambridge Sensotec
Text version of the page
Analogue outputs 0 to 5V or 4 to 20mA (specify at time of order)Each user-programmable to the following spans:E version 0 to 100%, 0 to 25%, 0 to HPS129-3

SPECIFICATION

5% Display N version 0 to 100%, 0 to 25%, 0 to 5%, 0 to5000ppm, 0 to 500ppmLversion0 to 25%, 0 to 5% Multi-digit LCD - character height 1 2.7mm Display ranges , 0 to 5000ppm, 0 to500ppm, 0 to 50ppm E version - display range 0.01% to 100.0%. Suitable forsamples containing mildly acidic gases; eg, carbon dioxide,hydrogen sulphide etc N version - display range 100ppm to 50%L version - display range 0.1ppm to 25% G1O1OTX output The output span of the Tx version is fixed to any one of theranges given above. Display resolution 0.1% from 10% to 100%0.01% from 0.50% to 9.99%10ppm from 500ppm to 4999ppm1ppm from 50ppm to 499ppm0.1ppm from 0ppm to 49.9ppm Alarm outputs Two alarms, each user-programmable for mode - HIGH, LOWor OFFHysteresis programmable from 0 to 10% of set pointVolt-free changeover contacts rated at 250V r.m.s.a.c max., 3Amax., max power 60W, normally energised. Stability Better than 2% of full-scale per month Ambient temperature Cell life 0 to 40°C (continuous operation)-5 to +55°C (intermittent operation) E version - up to 5 yearsN and L versions - up to 2 years Power supply Sample flow 110/120V or 220/240V, 50/60Hz; 24V dcMax power consumption 4VA Between 100 and 300ml/min for optimum operation. Max 1litre/mm. Enclosure Sample temperature Panel-mounting glass-reinforced Noryl case to IP40. Optionallockable transparent door to IP54 is available. -5 to +40°C (non condensing) Sample connections Dimensions Inlet and outlet: captive-seal compression fittings suitablefor 0.25 inch (or 6mm) o/d tube See drawing below Speed of response 190 - variable depending on sensor and concentration.Approximately 3s at % levels and 20s at ppm levels. The ppm figure assumes that the sensor is purged down to theppm concentration of interest. All dimensions in mm
In keeping with a policy of continuous development, wereserve the right to change any part of this specification without notice
DirectIndustry's Virtual Technical Library: PDF Catalogue | Technical Documentation | Brochure | Manual | Industrial directory | Specifications | Characteristics
Search Go
page 1 p.1
page 2 p.2
page 3 p.3
page 4 p.4
page 5 p.5
page 6 p.6
page 7 p.7
page 8 p.8
page 9 p.9
page 10 p.10
page 11 p.11
page 12 p.12
page 13 p.13
page 14 p.14
page 15 p.15
page 16 p.16
page 17 p.17
page 18 p.18
page 19 p.19
page 20 p.20
page 21 p.21
page 22 p.22
page 23 p.23
page 24 p.24
page 25 p.25
page 26 p.26
page 27 p.27
page 28 p.28
page 29 p.29
page 30 p.30
page 31 p.31
page 32 p.32
page 33 p.33
page 34 p.34
page 35 p.35
page 36 p.36
page 37 p.37
page 38 p.38
page 39 p.39
page 40 p.40
page 41 p.41
page 42 p.42
page 43 p.43
page 44 p.44
page 45 p.45
page 46 p.46
page 47 p.47
page 48 p.48
page 49 p.49
page 50 p.50
Pages:
1-50
51-52
pdf-page pdf di En 2008-11-47-22