Description
Developed using start-of-the-art design and the latest manufacturing techniques, the microprocessor based GB300
Oxygen monitor is a basic simple-to-use oxygen monitor specifically designed for medical laboratory use. It should be noted that the GB300 does not have a fixed low alarm (e.g. to warn of hypoxic oxygen levels) and as such should not be used in general medical applica- tions. Featuring easy calibration, settings are secured when the lock key is pressed. In addition the low power draw allows the unit to continuously for 2000 hours on just 3 AA alkaline batteries. The GB300 features the improved R17MED
oxygen sensor which provides superior long- term stability and accuracy.
Features
Microprocessor controlled for enhanced perform- ance Large easily read backlit LCD display Auto calibration Battery strength indicator Auto diagnostics with fault codes Sensor disconnect/failure alarm
Technical Data
Auto power off function after five minutes unat- tended
Analysis Range 0-100% O 2 Improved R17MED sensor with flow diverter
Full Scale Accuracy +/-2% at const temp / pressure Response time 90% of step change in 8 seconds Normal Operating Temperature 0-50° C (ambient temperature) Storage temperature -40°C to 70°C Power requirement 3 x AA alkaline batteries Battery life Minimum 2000 hours Sensor type Teledyne class R17MED Sensor life 36 months in air (10 months in 100% O Sensor cable Supplied with a stylish IP66 rated hard plastic carry /
storage case 2 ) Sensor cable Extendible to 3m Weight 420g Dimensions 140mm (h) x 88mm (w) x 76mm (d) Signal output 0-1 VDC or RS-232 (2400 Baud rate) RFI hardened Yes Warranty GB300: 24 months R17MED: 12 months Options 2.5 digit LCD display Compliance IOS 7767 Regulatory approvals CE, CSA and FDA Cambridge Sensotec Limited 31 Elizabeth Court St Ives CAMBS PE27 5BQ England Tel: +44 (0)1480 385812 Fax: +44 (0)1480 352529 Mob: +44 (0)7866 624236 Sales@cambridge-sensotec.co.uk Www.cambridge-sensotec.co.uk