catalogue search
P. 01
P. 02
P. 03
P. 04
|
|
|
|
You may also be interested in
Chemical, Activated carbon, Disinfection unit, Wastewater treatment plant, Adsorption unit
Text version of the page
| | |||||||||
| | HIGH FLOW SERIES and VENTSORB® PE Odor Control Systems | | |||||||
| | CALGON CARBON CORPORATION | | |||||||
| | |||||||||
| | |||||||||
| Skid-Mounted HF System | HF Top-Mounted Fan Stand Alone HF Canister Each model is available in the following sizes: 200 cfm(340 m3/hr) 400 cfm (680 m3/hr) 600 cfm (1,020 m3/hr) 1,000 cfm (1,700 m3/hr) 1,500 cfm (2,500 m3/hr) not available for the HF-T series 2,000 cfm (3,400 m3/hr) not available for the HF-T series 3,000 cfm (5,100 m3/hr) not available for the HF-T series For air flows greater than 3,000 cfm, please contact your Technical Service Representative to discuss our Titan carbon adsorption system. HF-C Stand Alone Canister HIGH FLOW canister, PPL/PE construction (with UV inhibitor) Stainless steel ground rod assembly Initial load of activated carbon Combined drain/water regeneration fitting with ball valve Water regeneration overflow fitting Lockable removable canister top or manway (HF2000/3000) Flanged inlet air nozzle (ANSI 150 flange, undrilled) Plain-end outlet air nozzle HF-S Skid-Mounted System HIGH FLOW stand alone canister (with HF-C features above) Initial load of activated carbon FRP fan with 3 ph/230-460V/60 Hz TEFC motor Combination motor starter, NEMA 4X Transition duct, flex connector, and flow control water regeneration valve Pressure differential indicator Skid mount for all items above HF-T Top-Mounted Fan System HIGH FLOW stand alone canister (with HF-C features above) Initial load of activated carbon Cast aluminum fan with 3 ph/230-460V/60 Hz TEFC motor Pressure differential indicator | ||||||||
| Description Calgon Carbon Corporation's HIGH FLOW and VENTSORB® PE Series Odor Control Systems represent a perfect fit for odor control applications where space is at a premium and simplicity is a must. They have one of the smallest footprints of any odor control system, considerably smaller than most biofilter and wet scrubbing systems. Within this small footprint, Calgon Carbon Corporation can provide a total package complete with fan, controls, and all of the accessories required. All the owner needs to do is make a few utility connections and flip a switch. Applications Due to its relatively small size, the HIGH FLOW and VENTSORB® PE are ideally suited for municipal wastewater collection system facilities such as pump stations and lift stations, where space is usually at a premium. They are also well suited to point source applications within the wastewater treatment plant itself. When filled with Calgon Carbon Corporation's patented CENTAUR® HSV water regenerable catalytic activated carbon, the HIGH FLOW and VENTSORB® PE are highly effective against moderate levels (less than 15 ppm) of hydrogen sulfide (H2S), as well as, odorous organic sulfur compounds such as methyl mercaptan and dimethyl disulfide. For the treatment of low H2S and organic sulfur compounds, the HIGH FLOW or VENTSORB® PE can be filled with one of our other activated carbons, such as OVC coconut carbon. With higher levels of H2S, please consider our MINI-PHOENIX® PLUS and PHOENIX® odor control systems, designed for the control of heavy hydrogen sulfide loadings. For applications other than continuous operation at the design air flow rate, contact Calgon Carbon Corporation for review and recommendation. Flexibility Both the HIGH FLOW and VENTSORB® PE can be configured in a number of ways in order to solve an odor problem. There are three basic models to choose from: A simple, passive, stand-alone canister Skid-mounted system complete with fan and controls A top-mounted fan system | |||||||||
| | |||||||||
| | Making Water and Air Safer and Cleaner | | |||||||
| | |||||||||