PyroUSB - Calex Electronics - #4

Text version of the page

Calex Electronics Limited PO Box 2, leighton Buzzard, Bedfordshire, England lU7 4AZ Tel: +44 (0)1525 373178/853800 Fax: +44 (0)1525 851319 lo-call Tel: 0845 3108053 E-mail: info@calex.co.uk Online: http://Specifications subject to change without notice www.calex.co.uk Issue B - Dec 09 OPTIONS longer output cable (3 m max.) Certificate of calibration FIXED MOUNTING BRACKET The l-shaped fixed mounting bracket offers a rigid support for the sensor and allows fine adjustment in a single plane. ADJUSTABlE MOUNTING BRACKET The adjustable mounting bracket consists of a fixed mounting bracket plus another l-shaped bracket. When assembled as shown the adjustable mounting bracket offers a rigid support for the sensor and allows fine adjustment in two planes. AIR PURGE COllAR The air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows into the fitting on the side and out of the aperture at the front. AIR/WATER COOlED hOUSING The air/water cooled housing allows the sensor to withstand ambient temperatures which exceed the normal 70°C limit. Air or water (depending on the degree of cooling required) flows into one of the fittings on the side and out of the other. To prevent condensation forming on the lens, the air/water cooled housing is supplied complete with an air purge collar. Please note, the air/water cooled housing must be ordered with the sensor and cannot be fitted by the user. All PyroUSB Series Sensors are supplied with a stainless steel mounting nut and are easy to install. Standard sensors will operate in ambient temperatures up to 70°C. For more hostile environments or difficult mounting conditions a wide range of accessories is available. ACCESSORIES lASER SIGhTING TOOl The laser Sighting Tool screws onto the front of the sensor during installation and indicates precisely where the sensor is aiming. Once the sensor has been aimed at the centre of the target and locked in position the laser Sighting Tool can be removed. The laser is activated by means of a push button on the front of the tool which has a latching mechanism.