Options
ProSight Series
LA Laser Aiming
PyroSight F Series
The standard fibre optic cables (nG and nQ) are sealed with a Teflon jacket over a stainless steel sheath and are
available in lengths of 1 m to 9 m. The cable diameter is 6.5 mm with a lens assembly that is 77 mm x 14 mm
diameter.
For added protection, the flexible, lightweight Stainless Steel Braid (SS B) is available with a built in air
purge and a stainless steel sight tube with a 1 inch pipe thread.
For applications with very confined access and the potential for electromagnetic interference, the mono-filament
fibre cables (nM) with a Teflon sheathing and Teflon outer jacket offer a smaller diameter of 1.3 mm and nonconductive
packaging.
nG Teflon Sealed Glass Fibre Optic Cable (n=length in feet)
nQ Teflon Sealed Quartz Fibre Optic Cable (n=length in feet)
nM Mono-filament Fibre Cable with Teflon sheathing and Teflon outer jacket (does not include lens and
offers D/2 optics)
SSB Stainless Steel Braided Conduit includes flexible, lightweight conduit, air purge and a stainless steel
sight tube
AL Built in Aim Light
3QT Non-conductive Ceramic Quartz Tip, 83 mm Long, threads onto end of fibre cable
ATEX ATEX Enclosure
Sensor Cable
0C Sensor Connector Kit (no Cable)
nCF Sensor Cable. Lengths (n) ordered in increments of 10 feet
nCM Sensor Cable. Lengths (n) ordered in increments of 3 meters
R Reverse Orientation of Connector 180°
nPT Sensor Cable is Pigtail/Hard-wired. Lengths (n) ordered in increments of 10 ft./3m, 20 ft./6m, 30
ft./12m
N.B. The standard fibre optic cable lengths (n) are 3ft/0.9m, 6ft/1.8m, 10ft/3m, 15ft/4.6m, 20ft/6.1m, 25ft/7.6m,
and 30ft/9.1m. Consult Calex for custom lengths, cables with vacuum bushings and right angle bends.
Calex Electronics Limited
PO Box 2, Leighton Buzzard, Bedfordshire, England LU7 4AZ
Tel: +44 (0)1525 373178/853800 Fax: +44 (0)1525 851319 Lo-call Tel: 0845 3108053
E-mail: info@calex.co.uk Online: http://www.calex.co.uk
Issue A - Jan 10
Specifications subject to change without notice
ACCESSORIES
PyroSight Series
To simplify installation and provide additional protection to the
sensor, Calex offers a Swivel Bracket (SB) and
Water Cooling Air Purge (WCAP) accessories. The recommended air flow is 1.5 to 5 m3/hr and water flow is 2
to 12 l/min.
AP Air Purge Assembly
WCAP Water Cooling Air Purge
SB Swivel Bracket (includes MP)
FMxx A Selection of Flange Mounts
PyroSight F Series
To simplify the installation and alignment of the PyroSight F series
sensors, Calex offers a Site Tube Swivel
Bracket (STSB) and a Fibre Optic Swivel Bracket (FOSB) that also includes the Air Purge (FOAP) accessory as
standard.
FOAP Fibre Optic Air Purge Assembly
WC Water Cooling for Fibre Optic Sensors
FOSB Fibre Optic Swivel Mounting Bracket (includes FOAP)
STSB Sight Tube Swivel Bracket (use with SSB)
RAM Right Angle Mirror for Fibre Optic Systems
FOFMxx A Selection of Fibre Optic Flange Mounts
STFMxx A Selection of Sight Tube Flange Mounts (used with SSB)
All Models
Calex’s PyroSight PC Software can be used to adjust
sensor settings as well as log and analyse data from the
sensor. It requires a Windows XP based PC, an Interface Module, and a USB to RS232 converter with a DB9
male connector.
IM Interface Module with Display, Output, and Power Supply
PACS Purge Air Control/Filter System
VCS Vortex Cooling System (requires WC)
MP Mounting Plate
PSS PyroSight PC Software for Windows XP with USB to RS232 Cable
NIST NIST Calibration Certificate
nM
nG and nQ
SSB
AP
SB
WC
FMxx
FOAP
FOSB
STSB
