• Products
  • Catalogues
  • Projects
  • News & Trends
  • Exhibitions

VR Solar ® / VR Solar ® True Front Access - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

For Renewable Energy Storage Capacities from 33 to 100 Ampere-hours The VR Solar , with its proprietary grid alloy and paste formulation, provides superior performance in both high cycling and float applications. This VRLA/AGM battery is designed to be easy to install and maintain, and offers long life and exceptional performance. ® featURes anD Benefits • Robust plate for extended cycle life. • Computer generated grid design optimized for high power density. • Low calcium grid alloy for reduced gas emissions and ease of recycling. • Flame-arresting one-way pressure-relief vent for safety and long life. • UL-recognized component. • Multicell design for economy of installation and maintenance. • Case and cover available in standard polypropylene. • Thermally welded case-to-cover bond to eliminate leakage. • Removable carrying handles (HIT Versions) • Can be used in any orientation. Upright, side, or end mounting recommended. • Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance. • Not restricted for air transport - complies with IATA/ICAO Special Provision A67. • Not restricted for surface transport – classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189. • Low profile terminals with threaded copper alloy inserts for reduced height, reduced maintenance, and increased safety. • Non-Hazardous, not restricted for any transportation mode (air, water or land) specifications Cells Per Unit Nominal Voltage Per Unit Operating Temperature Range (with temperature compensation) Normal Operating Temperature Range Recommended Maximum Charging Current Limit Float Charging Voltage Equalization and Cycle Service Charging Voltage Maximum AC Ripple (Charger) 0.5% RMS or 1.5% P-P of float charge voltage recommended for best results Self Discharge Battery can be stored up to 6 months at 77°F (25°C) before a freshening charge is required. Batteries stored at temperatures greater than 77°F (25°C) will require recharge sooner than batteries stored at lower temperatures. See C&D bulletin 41-7272, Self-Discharge and Inventory Control for details. Inter-unit connectors, racks and cabinet systems are available Inserted Terminal (Copper Alloy) 10-32 UNF bolt (VRS12-33, VRS12-50) ¼-20 UNC bolt (VRS12-75, VRS12-88, VRS12 -100) Terminal Hardware Initial Torque

 Open the catalogue to page 1

peRfoRmance Ratings Ampere Hour & Power per Unit to 1.75 Volts per cell @ 77°F (25°C) Additional ratings and application information are available in the Battery Selection Program found at www.cdstandbypower.net inDUstRy LeaDing cycLe Life BatteRy cHaRacteRistics Cycle Life Comparison - 5 Hour Rate 10000 6200 Notes: 1.) HIT versions include a handle, 2.) [xxx.x] represents dimensions in millimeters. 1400 Union Meeting Road P.O. Box 3053 • Blue Bell, PA 19422-0858 (215) 619-2700 • Fax (215) 619-7899 • (800) 543-8630 customersvc@cdtechno.com www.cdtechno.com Any data, descriptions or specifications...

 Open the catalogue to page 2

All C&D Technologies catalogues and technical brochures

  1. JC LEAD-CALCIUM

    2 Pages

    En
  2. LIBERTY® DCS

    4 Pages

    En
  3. Sageon® III

    4 Pages

    En
  4. ARR Legacy

    4 Pages

    En
  5. Lithium Ion

    4 Pages

    En
  6. BBA-160RT

    2 Pages

    En
  7. SGC Series

    4 Pages

    En
  8. DC-AC Inverters

    2 Pages

    En
  9. Micro ARE Series

    4 Pages

    En
  10. MCT II Batteries

    4 Pages

    En
  11. LCT II 1700

    2 Pages

    En

Archived catalogues

  1. DC/DC Databook

    36 Pages

    En