Demagnetizers in line installed in flexible conveyor chains, “D-F”, “D-R”, “D-B” series and similar
2Pages

Excellence in Demagnetization © Bussi Demagnetizers Demagnetizers in line, installed in flexible conveyor chains for the demagnetization of the single part The electronic impulse demagnetizers standard “D-F”, “D-R” and “D-B” series, have been designed to be installed into flexible conveyor chains such as Flexlink, Rotzinger and Bosch types, for the demagnetization of the single part. It is possible to adjust and install these demagnetizers in other flexible chains types and models. For a correct evaluation of the demagnetizing coils installation, please send us: »» »» Cross-sectional drawing of the conveyor chain with dimensions The materials of the conveyor chain The Demagnetizers consist of an electronic control cabinet with support and a separate demagnetization coil. Depending on the customer needs, demagnetizers can be supplied with or without support. Process Description: »» The parts are transferred from the line one at a time, inside the demagnetization coil. When the part is in the middle of the coil, the demagnetization impulse is imparted without it being necessary to stop the part and without any magnetic retention. Various electronic control units and coils are available according to the sizes of the parts. Minimum residual magnetism Demagnetization of the single part Minimum energy consumption (< 150 W) High productivity: up to 2 sec, depending on part size. No magnetic retention Easy installation Almost zero maintenance Support for electronic control unit Cable lenght between electronic control unit and coil Bussi Demagnetizing Systems Via Valpellice 13, 10060 San Secondo di Pinerolo (TO) ~ ITALY Email: bussi@bussi.it © Bussi Demagnetizing Systems - 2015 This publication or parts thereof may not be reproduced without our written permissi

Automotive Manufacturers Bearing Manufacturers Technical data required for a quote: »» »» »» »» »» »» »» Parts geometry Minimum and maximum parts dimensions Flexlink, Rotzinger, Bosch flexible chains: specify model Other flexible chains: a) section drawing with dimensions b) chain materials (e.g. aluminium structure, plastic chain) The cycle time (parts/hour); Working hours/day Minimum residual magnetism required Find out with us what the best demagnetization solution for your needs is. Provide us with the basic technical data: type of parts to demagnetize, the transfer system, the...