LVDT Displacement Sensor - burster - #1

Text version of the page

Untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:4.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:8.00pt "Arial", sans-serif; } .font3 { font:13.00pt "Arial", sans-serif; } .font4 { font:17.00pt "Arial", sans-serif; } .font5 { font:27.00pt "Arial", sans-serif; } .font6 { font:15.00pt "Impact", sans-serif; } LVDT Displacement Sensor With IN-LINE Amplifier Model 8739 Code: 8739 EN Delivery: ex stock Warranty: 24 months CAD data 2D/3D for this sensor: Download directly at www.traceparts.com Info: refer to data sheet 80-CAD-EN Application Inductive displacement sensors of this series measure linear displacements and indirectly all mechanical values convertible into displacements by additional equipment (i.e. tension and compression forces, extension, torque, vibration). The sensor body equipped with a connector has an outer diameter of only 8 mm and therefore is especially well suitable for the integration in dimensionally restricted structures. Typical application fields are displacement and extension measurements on ► Machines ► Servo systems ► Motor vehicles ► Test benches ► Production plants Ranges from 0 ... 1 mm to 0 ... 10 mm Non-linearity 0.25 % F.S. Sensor diameter 8 mm Vibration and wear free Output 0 ... 10 V Sensor without IN-LINE amplifier upon request Sensor with IN-LINE amplifier and USB interface upon request IN-LINE amplifier Displacement sensor z LU G) 00 Description The cylindrical case made of stainless steel, houses a differential transformer (LVDT). It consists of a primary and two secondary coils with axially moveable core. A displacement of this core changes the magnetic induction of the coils. The IN-LINE carrier frequency amplifier converts the displacement into a direct proportional electrical DC voltage. The transducer is constructed as a probe at which within the measuring range a spring pushes the probe tip towards the measuring object. Bellows protect the mechanical guidance of the probe tip against pollution and splash water. The IN-LINE amplifier is integrated in the connector cable and adjusted specifically to the sensor. Both components form a unit while they can be separated for mounting purposes (miniature plug connection at the transducer). The use of not harmonized components may lead to increased measurement errors. The sensor body is galvanically isolated from the excitation and from the measuring signal. Lateral forces decrease the durability. Technical changes reserved - Latest updates of data sheet always under www.burster.com burster praezisionsmesstechnik gmbh & co kg ■ Tel. +49-7224-6450 ■ Fax 64588 Talstr. 1-5 ^ D-76593 Gernsbach ■ www.burster.com ■ info@burster.com