Text version of the page

8526 EN - 2

Compression Load Cell - 13615 Technical Data

Dim. tolerances acc. ISO 2768-f 3 Mounting Mass Natu- Range [mm] Holes with ral- Metric Fre- Thread qu
* H 1 +0,2 -0,4 ency øD1 øD2 øD3 øD4 øD5 H1 H2 øT N øA øB øC K L M G [kg] [kHz] Order Code Measuring Dimensions 8526 - 5100 0 ... 100 N 31.8 29.4 20.6 8.1 19.0 9.9 8.1 25.5 3 - 3 2 - 40 2.5 M 2.5; 3 deep 0.04 28526 - 5200 0 ... 200 N 31.8 29.4 20.6 8.1 19.0 9.9 8.1 25.5 3 - 3 2 - 40 2.5 M 2.5; 3 deep 0.04 38526 - 5500 0 ... 500 N 31.8 29.4 20.6 8.1 19.0 9.9 8.1 25.5 3 - 3 2 - 40 2.5 M 2.5; 3 deep 0.04 58526 - 6001 0 ... 1 kN 31.8 29.4 20.6 8.1 19.0 9.9 8.1 25.5 3 - 3 2 - 40 2.5 M 2.5; 3 deep 0.04 88526 - 6002 0 ... 2 kN 31.8 29.4 20.6 8.1 19.0 9.9 8.1 25.5 3 - 3 2 - 40 2.5 M 2.5; 3 deep 0.04 118526 - 6005 0 ... 5 kN 31.8 29.4 20.6 8.1 19.0 9.9 8.1 25.5 3 - 3 2 - 40 2.5 M 2.5; 3 deep 0.04 178526 - 6010 0 ... 10 kN 31.8 29.4 20.6 8.1 19.0 9.9 8.1 25.5 3 - 3 2 - 40 2.5 M 2.5; 3 deep 0.05 258526 - 6020 0 ... 20 kN 38.1 35.0 28.0 10.7 27.0 16.0 14.0 31.5 3 - 4.5 3 - 40 3 M 2.5; 3 deep 0.05 258526 - 6050 0 ... 50 kN 38.1 35.0 28.0 10.7 27.0 16.0 14.0 31.5 3 - 4.5 3 - 40 3 Dimensional drawing M 2.5; 3 deep 0.05 408526 - 6100 0 ... 100 kN 50.8 48.0 36.0 15.2 33.0 25.4* 22.4 42.0 6 7 4.5 3 11 45 6 M 4; 6 deep 0.3 408526 - 6200 0 ... 200 kN 76.2 74.0 46.0 20.0 45.0 38.1* 33.5 60.0 6 7 4.5 3 11 45 6 M 4; 6 deep 1.2 40

Electrical values

Bridge resistance (full bridge): foil-model strain gauge 350 Ω , nominal**Excitation: measuring range ≤ 0 ... 1 kN max. 5 V DC measuring range Model 8526 ≥ 0 ... 2 kN max. 10 V DCOutput: 1 mV/V ± 0.25 % for ranges to 0 ... 1 kN Ω ± 0.1 %, model 1148-6080The bridge output voltage resulting from a shunt of this value is stated in the calibration certificate. 1 mV/V ± 0.5 % for ranges from 0 ... 2 kN Calibration resistor: 100 k

**

Deviations from the stated value are possible. Resistance between supply lines max. 500 Ω for standardization.

Environmental conditions

Temperature operating: - 20 °C ... +100 °CTemperature compensated: +15 °C ... + 70 °C Temperature: to effect zero ≤ ± 0.02 % F.S./K to effect span The CAD drawing (3D/2D) for this sensor can be imported online directly into your CAD system. Download via www.burster.com or directly at www.traceparts.com. For further information about the burster traceparts cooperation refer to data sheet 80-CAD-EN. ≤ + 0.03 % Rdg./K

Mechanical values

≥ 30 mm cable outlet centric between two threaded holesWiring code: white supply positive brown supply negative yellow signal output positive green signal output negativeDimensions and weight: see table and dimension drawing Measuring accuracy:Combined value of non-linearity, hysteresis and non-repeatability. ranges 0 ... 1 kN ≥ ≥ 30 mmmeasuring range 25 mmmeasuring range 0...20 kN and 0...50 kN high flexible, shielded TPE insulated cable, ø 3 mm, with bare ends for soldering, length 2 m, at sensor body 40 mm anti-kink coil, ø 5 mm, bending radius ≤ 0.25 % F.S. ranges 0 ... 2 kN ≤ ≥ 0...10 kN high flexible, shieldedTPE insulated cable, ø 2 mm, with bare ends for soldering, length 2 m, at sensor body 40 mm anti-kink coil, ø 3 mm, bending radius 0...100 kN high flexible, shielded TPE insulated cable, ø 3 mm, with bare ends for soldering, length 2 m, reinforced strain relief through a 10 mm long metal sleeve at cable outlet at sensor body 45 mm anti-kink, ø 5 mm, bending radius ≤ 0.5 % F.S.Deflection, full scale: 40 µm ... 80 µm Overload safe: 150 % of capacity Dynamic performance: recommended 50 % of capacity permitted 70 % of capacity Mounting:Bottom side with three 3 mm M 2.5 or. 6 mm M 4 deep mounting holes on diameter T, sharing 120°, see table.Design: bending membrane, welded cover Material: high-grade stainless steel 1.4542 Protection class acc. to EN 60529: IP64 Electrical termination:For all measuring ranges the adapter for standard output 1 mV/V (length 70, diameter 8) is integrated in the connection cable distanced ca. 30 cm from wire end.measuring range

Order Information

Load cell, measuring range 0 ... 2 kN 8526-6002

Accessories

Mating connector , 12 pins, for burster desktop devices Model 9941Mating connector, 9 pins, for 9235 and 9310 Model 9900-V209 Mounting of mating connector on sensor cable Order Code 99004 only for connection to SENSORMASTER model 9163 desktop version Order Code 99002Strain gauge simulator Model 9405 refer to data sheet 76-9405 in section 7 of the catalog.Signal processing The simulator replaces the strain gauge sensor for the adjustment or verification of the amplifier Amplifier, supplies and process controllers e.g. indicator model 9180, USB sensor interface model 9205, DIGIFORCE
® model 9306/9310, modular amplifier model 9243 refer to section 9 of the catalog.

Manufacturer Calibration Certificate (WKS)

Load cell or load cells and measurement device calibration in 20 % steps up and down, unchanged installation position.
310-008526EN-5072-021511 Technical changes reserved -Latest updates of data sheet always under www.burster.com burster praezisionsmesstechnik gmbh & co kg . Tel. +49-7224-6450 . Fax 64588Talstr. 1-5 . D-76593 Gernsbach . www.burster.com . info@burster.com