Data Sheet Typ 8532 - 2 Pages

Add to MyDirectIndustry favorites
Data Sheet Typ 8532

Catalog excerpts

Low-Cost Compressive Load Cell With IN-LINE amplifier Very economical price Industrial manufacture Manufacture of customized machinery Geological investigations Motor vehicle engineering Commercial agriculture Bridge building Technical changes reserved. All data sheets at www.burster.com Stainless steel sensor Compact design Normalized output signal 0 ... 10 V This force measurement chain was developed for applications where a low cost solution is more important than achieving high levels of accuracy. The sensors strain gauge technology allows the measurement of static and dynamic forces. The load cell is also designed for applications that provide only little space due to its compact design. These properties, together with the sensors dust protection, make the measuring chain suitable for a wide range of applications, such as Measuring ranges between 0 ... 500 N and 0 ... 20 kN Customer-specific versions possible from 20 pieces up Description The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor. The domed form, however, minimizes the effect of a force that is not exactly axial. A full-bridge strain gauge is used as the measuring element inside the sensor, by means of which the force to be measured is converted into a proportional electrical voltage. The in-line amplifier increases this voltage from 0 up to 10 V. The surface against which the sensor rests is important for the quality of the measurement. It should be ground. It must be sufficiently hard and thick and not deform under load. burster praezisionsmesstechnik gmbh & co kg Germany Talstr. 1-5 . Gernsbach 76593 . Phone +49-7224-6450 www.burster.com info@burster.com

 Open the catalog to page 1

Weight: Mounting: Sensor Electrical values Excitation voltage: Output voltage: Output resistance: Limit frequency: Isolation resistance (sensor): Bridge resistance (sensor): Power consumption: Environmental conditions Sensor Range of operation temperature: Range of nominal temperature: Influence of temperature to zero signal: Influence of temperature to measurement signal: IN-LINE amplifier Ambient temperature: Temperature coefficient: Mechanical values Measurement accuracy: < 1 % F.S. Combined value consisting of non-linearity, hysteresis and nonrepeatability in constant installation...

 Open the catalog to page 2

All Burster präzisionsmesstechnik gmbh & co kg catalogs and technical brochures

  1. Torque Sensors

    9 Pages

  2. Load cells

    25 Pages

  3. Model 1282

    2 Pages

  4. 1144-Pt

    2 Pages

  5. ForceMaster

    4 Pages

  6. 9243

    2 Pages

  7. DIGIFORCE® –

    9 Pages